SDA240A Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – 120 AMPS, 35 to 45 VOLTS ISOLATED CENTER TAP COMMON CATHODE RECTIFIER

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information^1/
SDA240 __ __
│ └ Screening ^2/ __ = Not Screened
│
TX = TX Level
│
TXV = TXV
│
S = S Level
│
│ _{Peak Repetitive Reverse Voltage}
│
└
A = 35 V
B = 45 V
SDA240A and SDA240B
SCHOTTKY
120 AMPS, 35 to 45 VOLTS
ISOLATED CENTER TAP
COMMON CATHODE RECTIFIER
FEATURES:
• Low Forward Voltage
• 150^OC Operating Junction Temperature
• Guard-ring for Stress Protection
• Guaranteed Reverse Avalanche
• Isolated Electrically
• Dual Diode Construction can be Paralleled for
Higher Current Output
• Hermetically Sealed
• Can be Processed to TX, TXV, or S Levels
• Other Terminal Configurations Available
MAXIMUM RATINGS
Part Number
Symbol
Units
SDA240A
SDA240B
Peak Repetitive Reverse
Voltage (per leg) and DC
Blocking Voltage (per leg)
V_RRM V_R
Volts
35
45
Half Wave Rectified Forward
Current Averaged Over Full
Cycle (per leg)
Resistive Load, 60 Hz, Sine
Wave, T_C = 25^OC
I_O
Amps
120
120
Voltage Rate of
Change (At Rated
V_R)
Dv/dt
V/µs
1000
1000
Peak Surge Current
(T_C = 55^OC, 8.3 ms
Pulse, Superimposed on
Rated Current at Rated
Voltage)
I_FSM
Amps
800
800
Operating and Storage
Temperature
T_OP & T_STG
o_C
-65 to +150
-65 to +150
THERMAL CHARACTERISTICS
Thermal Resistance (Junction to Case), per leg
Part Number
SDA240A
SDA240B
Symbol
R_θJC
R_θJC
Value
0.85
0.85
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: SH0046A
Unit
O_C/W
O_C/W
DOC