SDA113_1 Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – THREE PHASE BRIDGE RECTIFIER ASSEMBLY

Solid State Devices, Inc.
14830 Valley View Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
DESIGNER’S DATA SHEET
Part Number / Ordering Information ^1/
SDA113 __ __ __
│ │ └ Lead Bend ^3/ __ = Straight Leads
││
││
UB = Up Bend
DB = Down Bend
││
│ └ Terminals ^{2/ 3/} L = Copper Leads
│
_ = Turret Terminals
│
└ Voltage A = 50 V
B = 100 V
C = 200 V
D = 400 V
E = 600 V
F = 800 V
G = 1000 V
SDA113 Series
7.5 A / 1000V
THREE PHASE BRIDGE
RECTIFIER ASSEMBLY
Features:
• Higher Blocking Voltage Available. Contact Factory.
• High Output Current 7.5 Amps
• Low Reverse Leakage Current
• Constructed with Void-free, Hermetically Sealed Discretes
• Aluminum Case for Maximum Thermal Conductivity
• Small Package Size (1.500 x 0.875 x 0.310”)
• TX and TXV & S Level Screening Available
• Fast, Ultra Fast, & Hyper Fast Versions Available.
Contact Factory.
Maximum Ratings
Peak Repetitive and Peak Surge Reverse Voltage
Average Rectified Forward Current ^4/
(Resistive Load, 60 Hz Sine Wave)
Peak Surge Current
(8.3 ms Pulse, Half Sine Wave, T_A = 25 °C, per leg)
Operating & Storage Temperature
T_C = 55°C
T_C = 100°C
Maximum Thermal Resistance, Junction to Case
Symbol
V_RRM
V_RSM
V_R
Io
I_FSM
T_op & T_stg
R_θJC
Value
Units
See Voltage Key Volts
7.5
5.5
50
-55 to +150
Amps
Amps
ºC
4.5
ºC/W
SDA113 ( L )
SDA113
Lead Dia = .050” Lead Length = 0.5” min
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RA0047A
DOC