SAM50FA Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – 0.5 AMP 5000 VOLTS 150 nsec HIGH VOLTAGE RECTIFIER

SOLID STATE DEVICES, INC.
14830 Valley View Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
Designer's Data Sheet
FEATURES:
• Ultra Fast and Fast Recovery: 150 nsec maximum.
• Hermetically Sealed Surface Mount Package
• Void Free Construction
• Metallurgically Bonded
• 175° C Maximum Operating Temperature
• TX, TXV, and Space Level Screening Available
SAM50FA
0.5 AMP
5000 VOLTS
150 nsec
HIGH VOLTAGE
RECTIFIER
AXIAL
SURFACE MOUNT
SQUARE TAB
Maximum Ratings
SYMBOL
VALUE
Peak Inverse Voltage
Average Rectified Current 25°C
100°C°
Maximum Reverse Current 25°C
100°C
PIV
5000
I_O
500
300
I_R
3.0
15
Maximum Forward Voltage
@ I_F = 500mA
Maximum Surge Current 1 Cycle
Maximum Reverse Recovery Time
V_F
13
I_FSM
25
trr
150
Maximum Junction Capacitance
(fT = 1MHz @ 100 Volts)
C_J
10
Typical Thermal Impedance (L = 3/8")
OJL/OJE
18
NOTES:
1. Operating and testing over 10,000 V/inch may require encapsulation or immersion in a suitable dielectric material
2. Max. forward voltage measured with instantaneous forward pulse of 300usec minimum
3.Max lead/end tab temp. for soldering is 250°C 3/8" from the case for 5 sec maximum
4. Operating and storage temperature: -65°C to +175°C
5. Reverse recovery test conditions: IF = .5A, IR = 1A, IRR = .25A, TA = 25°C
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RV0033B
UNITS
Volts
mA
µΑ
Volts
Amps
nsec
pf
°C/W