RV0033C_15 Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – HIGH VOLTAGE RECTIFIER

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number / Ordering Information ^1/
SAM 50 FA _ _ __
⏐ ⏐ ⏐ L Screening^2/ = None
⏐⏐ ⏐
TX = TX Level
⏐⏐ ⏐
TXV = TXV Level
⏐⏐ ⏐
S = S Level
⏐ ⏐ ^{L Package}
⏐⏐
⏐⏐
___ = Axial
SMS = Surface Mount Square Tab
⏐ ^{L Recovery Time}
⏐
F = Fast Recovery
⏐
L Voltage
50 = 5000
SAM50FA
0.5 Amp
5000 VOLTS
150 nsec
HIGH VOLTAGE
RECTIFIER
FEATURES:
• Ultra Fast and Fast Recovery: 150 nsec
Maximum
• Hermetically Sealed Surface Mount Package
• Void Free Construction
• Metallurgically Bonded
• 175°C Maximum Operating Temperature
• TX, TXV, and Space Level Screening Available^2/
Maximum Ratings
Symbol
Value
Peak Inverse Voltage
Average Rectified Forward Current
Maximum Reverse Current
Maximum Forward Voltage
@ I_F = 500 mA
Maximum Surge Current 1 Cycle
25ºC
100ºC
25ºC
100ºC
Maximum Reverse Recovery Time
Maximum Junction Capacitance
(fT = 1MHz @ 100 Volts)
Typical Thermal Impedance (L=3/8”)
1/ For Ordering Information, Price, and Availability – Contact Factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Operating and testing over 10,000 V/inch may require encapsulation or
immersion in a suitable dielectric material.
4/ Max. forward voltage measured with instantaneous forward pulse of
300µsec minimum.
5/ Max. lead/end tab temp. for soldering is 250°C, 3/8”from the case for 5 sec
maximum.
6/ Operating and storage temperature: -65°C to +175°C.
7/ Reverse Recovery Test Conditions: IF=.5A, IR=1mA, IRR=.25A, TA=25°C.
PIV
5000
Io
500
300
I_R
3.0
15
V_F
13
I_FSM
25
trr
150
C_J
10
R_θJL/ R_θJE
18
Axial Leaded
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RV0033C
Units
Volts
mA
μA
Volts
Amps
nsec
pf
°C/W
SMS
DOC