RS0061 Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – POSITIVE CENTERTAP SCHOTTKY RECTIFIER

SOLID STATE DEVICES, INC.
14830 Valley View Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer's Data Sheet
FEATURES:
• Low Forward Voltage Drop
• Low Reverse Leakage
• Hermetically Sealed Power Surface Mount Package
• Guard Ring for Overvoltage Protection
• Eutectic Die Attach
• 175^oC Operating Junction Temperature
• TX, TXV and Space Level Screening Available
SSR8045CT/3
80AMPS
45 VOLTS
POSITIVE CENTERTAP
SCHOTTKY
RECTIFIER
TO-3
Available in Following Configurations:
SSR8045/3 - Rectifier
(See Data Sheet RS0047)
SSR8045CT/3 - Common Cathode
SSR8045CA/3 - Common Anode
SSR8045D/3 - Doubler
Maximum Ratings
SYMBOL
VALUE
Peak Repetitive Reverse and
DC Blocking Voltage
V_RRM
V_RWM
45
V_R
Average Rectified Forward Current.
(Resistive load, 60Hz, Sine Wave, T_A =25^oC) ^1/
Io
80
Peak Surge Current
(8.3 ms Pulse, Half Sine Wave Superimposed on Io, allow
I_FSM
600
junction to reach equilibrium between pulses, T_A = 25^oC) ^1/
Operating and Storage Temperature
T_OP & Tstg
Maximum Thermal Resistance
Junction to Case ^1/
R_θJC
NOTES:
1/ Both Legs Tied Together. For Doubler configuration ratings shall be:
Io = 40A per Leg and I_FSM = 300A per Leg.
All Electrical Characteristics @25^oC, Unless Otherwise Specified.
-65 TO +175
0.7
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RS0061B
UNITS
Volts
Amps
Amps
o_C
o_C/W