RP0007_15 Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – STANDARD RECOVERY HIGH CURRENT RECTIFIER

Solid State Devices, Inc.
14830 Valley View Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
FEATURES:
• Forward Current to 400 Amps
• PIV 1000 to 2000 Volts
• Transient Voltage Rating of 200 Volts Above PIV
• Pressure Contact Device
• Single Chip Construction
• Low Forward Voltage Drop
• Hermetically Sealed
• For High Power Applications
• For Reverse Polarity Version Add Suffix “R”
• Fast Recovery Version Available (0.7 µsec typical)
• Higher Voltage Versions up to 5000 Volts
Available
• TX, TXV, and Space Level Screening Available
SDR9400S10
thru
SDR9400S20
400 AMPS
1000 ─ 2000 VOLTS
25 µsec
STANDARD RECOVERY
HIGH CURRENT RECTIFIER
DO-9
MAXIMUM RATINGS ^1/
Peak Repetitive Reverse Voltage
and DC Blocking Voltage
Average Rectified Forward Current Over Full Cycle
(Resistive Load, 60 Hz, Sine Wave, T_A=25^oC)
Peak Surge Current
(8.3 ms Pulse, Half Sine Wave, T_A=25^oC)
Operating and Storage Temperature
Maximum Thermal Resistance
(Junction to Case)
NOTES:
1/ Mounting force = 238.95 in.-lbs. ± 10% for non-lubricated threads
Typical weight = 220 grams
SDR9400S10
SDR9400S15
SDR9400S20
Symbol
V_RRM
V_RWM
V_R
I_O
Value Unit
1000
1500
2000
Volts
400
Amps
I_FSM
3500
Amps
T_OP & Tstg -55 to +175 ^oC
R_θJC
0.14
o_C/W
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RP0007B
DOC