RH0051G Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – CENTERTAP RECTIFIER

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information ^1/
SDR62 __ _J_ __ __
│ ││
│ ││
││ |
│ └ _Screening ^2/ _{__ = Not Screened}
│
TX = TX Level
│
TXV = TXV Level
│││ │
S = S Level
│││ │
│ │ │ └ Leg Bend
│ ││
(See Figure 1)
__ = Straight
DB = Down Bend
│ ││
UB = Up Bend
│ │ └ _{Package J = TO-257}
││
│
│
│
│
│
└
Pin
Configuration
CT: common cathode
CA: common anode
D: doubler
DR: doubler reverse
└ _{Voltage 3 = 300V, 4 = 400V, 5 = 500V, 6 = 600V}
SDR623CTJ, CAJ, DJ, DRJ
thru
SDR626CTJ, CAJ, DJ, DRJ
40 AMPS
300 - 600 VOLTS
35 nsec
HYPER FAST
CENTERTAP RECTIFIER
FEATURES:
 Hyper Fast Recovery: 35 nsec Maximum ^3/
 High Surge Rating
 Low Reverse Leakage Current
 Low Junction Capacitance
 Isolated Hermetically Sealed Package
 Gold Eutectic Die Attach Available
 Ultrasonic Aluminum Wire Bonds
 Custom Lead Forming Available
 TX, TXV, and Space Level Screening Available
Consult Factory.^2/
Available in Following Configurations:
Common Cathode Centertap: SDR623CTJ, SDR623CTJUB, SDR623CTJDB; SDR624CTJ, SDR624CTJUB,
SDR624CTJDB; SDR625CTJ, SDR625CTJUB, SDR625CTJDB; SDR626CTJ, SDR626CTJUB,SDR626CTJDB
Common Anode Centertap: SDR623CAJ, SDR623CAJUB, SDR623CAJDB; SDR624CAJ, SDR624CAJUB,
SDR624CAJDB; SDR625CAJ, SDR625CAJUB, SDR625CAJDB; SDR626CAJ, SDR626CAJUB, SDR626CAJDB
Doubler: SDR623DJ, SDR623DJUB, SDR623DJDB; SDR624DJ, SDR624DJUB, SDR624DJDB; SDR625DJ,
SDR625DJUB, SDR625DJDB; SDR626DJ, SDR626DJUB,SDR626DJDB; SDR623DRJ, SDR623DRJUB,
SDR623DRJDB; SDR624DRJ, SDR624DRJUB, SDR624DRJDB; SDR625DRJ, SDR625DRJUB, SDR625DRJDB;
SDR626DRJ, SDR626DRJUB,SDR626DRJDB
TO-257
MAXIMUM RATINGS
Symbol Value
Peak Repetitive Reverse Voltage and
DC Blocking Voltage
SDR623CTJ
SDR624CTJ
SDR625CTJ
SDR626CTJ
Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, T_A=25^oC) ^4/
Peak Surge Current (8.3 ms Pulse, Half Sine Wave, T_A=25^oC) ^5/
Operating and Storage Temperature
Maximum Thermal Resistance Junction to Case ^4/
Junction to Case ^5/
V_RRM
V_RWM
V_R
I_O
I_FSM
T_OP & T_STG
R_JC
300
400
500
600
40 ^6/
150
-65 to +200
1.2
2.0
Units
Volts
Amps
Amps
o_C
o_C/W
NOTES: 1/ For ordering information, price, operating curves, and availability - contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Recovery conditions: I_F = 0.5 Amp, I_R = 1.0 Amp, rec. to 0.25 Amp.
4/ Both legs tied together.
5/ Per leg.
6/ Doublers: I_O= 20A/leg.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RH0051G
DOC