RC0172A Datasheet, PDF (1/3 Pages) Solid States Devices, Inc – ULTRA FAST RECOVERY HIGH VOLTAGE RECTIFIER

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number / Ordering Information^1/
JANS 1N651 __ __
│
│ └ Package
│
│
__ = Axial
│
│
US = Surface Mount
│
│
Square Tab
│
└ Voltage
│
2 = 1,500 V
6 = 4,000 V
│
3 = 2,000 V
7 = 5,000 V
│
│
4 = 2,500 V
5 = 3,000 V
8 = 7,500 V
9 = 10,000 V
└ _Screening^2/
JAN
JANTX
JANTXV
JANS
JAN, JANTX, JANTXV, JANS
1N6512 – 1N6519
Series
0.5 – 1.5 AMP
1,500 V – 10,000 V
ULTRA FAST RECOVERY
HIGH VOLTAGE RECTIFIER
FEATURES:
 Fast recovery: 70 nsec maximum
 PIV to 10 KV
 Hermetically sealed axial and surface mount package
 Void-free ceramic frit glass construction
 High temperature Category I eutectic metallurgical bond
 Excellent thermal shock performance
 For use in high voltage systems
 175°C maximum operating temperature
 JAN, JANTX, JANTXV, and JANS screening available in
accordance with MIL-PRF-19500/575
MAXIMUM RATINGS^3/
Part Number
Conditions
V_RWM
I_FSM
t_p = 8.3 ms
I_O
4/
5/
t_RR
25°C
R_ƟJL1
L = .25ʺ
(6.35 mm) (Air)
R_ƟJL2
L = .25ʺ
(6.35 mm) (Oil Bath)^6/
R_ƟJEC
7/
Units
V_DC
A (pk)
A_DC
A_DC
ns
°C/W
°C/W
°C/W
1N6512, US
1,500
100
1.5
1.0
70
16
12
4
1N6513, US
2,000
100
1.5
1.0
70
16
12
4
1N6514, US
2,500
60
1.0
0.65
70
16
12
4
1N6515, US
3,000
60
1.0
0.65
70
16
12
4
1N6516, US
4,000
40
0.75
0.5
70
16
12
5
1N6517, US
5,000
40
0.75
0.5
70
16
12
5
1N6518, US
7,500
25
0.5
0.35
70
16
12
5
1N6519, US
10,000
25
0.5
0.35
70
16
12
5
MAXIMUM RATINGS^3/
Symbol
Value
Unit
Storage Temperature
T_STG
-65 to +200
°C
Operating Temperature
T_J
-65 to +175
°C
Notes:
1/ For ordering information, price, and availability – Contact factory.
2/ Screened per MIL-PRF-19500/575.
3/ Unless otherwise specified, T_A = 25°C.
4/ Derate linearly for air (+55°C ≤ T_A ≤ +100°C. I_O at T_A = +55°C to I_O at T_A = +100°C), for oil bath
(+80°C ≤ T_L ≤ +100°C. I_O at T_L = +80°C to I_O at T_A = +100°C), and for end cap (+100°C ≤ T_A ≤
+125°C. I_O at T_EC = +100°C to I_O at T_EC = +125°C).
5/ Derate linearly for air (+100°C ≤ T_A ≤ +175°C. I_O at T_A = +100°C to I_O = 0A at T_A = +175°C), for
oil bath (+100°C ≤ T_L ≤ +175°C. I_O at T_L = +100°C to I_O = 0A at T_A = +175°C), and for end cap
(+125°C ≤ T_A ≤ +175°C. I_O at T_EC = +125°C to I_O = 0A at T_A = +175°C).
6/ Oil or fluorocarbon fluid with leads heat sunk at specified L.
7/ R_ƟJEC is junction to end-cap thermal impedance with “US” suffix identification, i.e., 1N6512US.
Axial
Surface
Mount
Square Tab
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0172A
DOC