RC0152A Datasheet, PDF (1/3 Pages) Solid States Devices, Inc – ULTRAFAST RECOVERY HIGH POWER RECTIFIER

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information ^1/
SDR75U __ __
│
│
│
│
│
│
│
│ ^└ Screening ^2/ __ = Not Screened
│
TX = TX Level
│
TXV = TXV Level
│
S = S Level
│
└ Pin Configuration (See Table 1)
│
__ = Normal (Cathode to Stud)
│
R = Reverse (Anode to Stud)
└ _{Family/Voltage}
20 = 200V
30 = 300V
40 = 400V
50 = 500V
SDR75U20
thru
SDR75U50
75 Amp
ULTRAFAST RECOVERY
HIGH POWER RECTIFIER
200-500 Volt
50 nsec
Features:
 Low Reverse Leakage Current
 Single Chip Construction
 PIV to 500V
 Hermetically Sealed
 Low Thermal Resistance
 Higher Voltage Devices Up to 1KV Available*
 Fast and Ultra Fast Recovery Versions Available*
 For Reverse Polarity Add Suffix “R”
 TX, TXV, and S-Level Screening Available ^2/
*Contact Factory
Maximum Ratings
Peak Repetitive Reverse
and DC Blocking Voltage
Average Rectified Forward Current
(Resistive Load, 60 Hz Sine Wave, T_A = 25°C)
Peak Surge Current
(8.3 ms Pulse, Half Sine Wave, T_A = 25°C)
Operating & Storage Temperature
Maximum Total Thermal Resistance
Junction to Case
SDR75U20
SDR75U30
SDR75U40
SDR75U50
Symbol
V_RRM
V_RWM
V_R
Io
I_FSM
T_OP & T_STG
R_JC
Value
200
300
400
500
75
450
-65 to +200
0.85
Units
Volts
Amps
Amps
ºC
ºC/W
Notes:
1/ For ordering information, price, operating curves, and availability- contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
DO-5
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0152A
DOC