RC0132A Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – FAST RECOVERY RECTIFIER

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information ^1/
SPD10 __ __
││
││
││
││
││
└ _{Screening 2/ __ = Not Screened}
TX = TX Level
TXV = TXV Level
S = S Level
│
│
└ _{Pin Configuration}
__ = Normal (Cathode to Stud)
│
(See Table 1)
R = Reverse (Anode to Stud)
└ Family/Voltage
192 = 800V
194 = 1000V
195 = 1100V
196 = 1200V
197 = 1300V
198 = 1400V
SPD10192
Thru
SPD10198
35 Amp
FAST RECOVERY
RECTIFIER
800 - 1400 Volt
250 nsec
Features:
• Fast Recovery: 250 nsec maximum
• PIV to 1400V
• Low Reverse Leakage Current
• Hermetically Sealed
• Single Chip Construction
• High Surge Rating
• Low Thermal Resistance
• Ultra Fast and Hyper Fast Recovery Versions
Available*
• For Reverse Polarity Add Suffix “R”
• TX, TXV, and S-Level Screening Available ^2/
*Contact Factory
Maximum Ratings
Peak Repetitive Reverse and DC Blocking
Voltage
Average Rectified Forward Current
(Resistive Load, 60 Hz Sine Wave, T_A = 25 °C)
Peak Surge Current
(8.3 ms Pulse, Half Sine Wave, T_A = 25 °C)
Operating & Storage Temperature
Maximum Total Thermal Resistance
Junction to Case
SPD10192
SPD10194
SPD10195
SPD10196
SPD10197
SPD10198
Symbol
V_RRM
V_RWM
V_R
Io
I_FSM
T_OP & T_STG
R_θJC
Value
800
1000
1100
1200
1300
1400
35
500
-65 to +150
1.0
Units
Volts
Amps
Amps
ºC
ºC/W
DO-5:
Notes:
1/ For ordering information, price, operating curves, and availability- contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0132A
DOC