RC0119J Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – RECTIFIER

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information ^1/
1N70 __ __ __
│ │ └ Screening ^2/
││
__ = Not Screened
││
TX = TX Level
││
TXV = TXV
││
S = S Level
││
│
│
│
│
└ _{Package Type}
__ = Axial Leaded
SMS = Surface Mount Square Tab
│
└ Voltage/Family
66 = 100V
67 = 150V
68 = 200V
MAXIMUM RATINGS ^3/
RATING
1N7066 thru 1N7068
and
1N7066SMS thru 1N7068SMS
10 AMP
100 ─ 200 VOLTS
30 ns HYPERFAST RECOVERY
RECTIFIER
FEATURES:
 Hyper fast reverse recovery: 30ns maximum ^4/
 High surge current: 350 A maximum
 Hermetically sealed
 Low forward voltage drop .95 @10A
 Void free ceramic frit glass construction
 High temperature category I eutectic metallurgical
bond
 Solid silver leads
 Available in axial & square tab versions
 TX, TXV, and S-level screening available ^2/
 Available as a QPL product per MIL-PRF-19500/768
 Axial lead higher current replacements for:
1N5807, 1N5809, 1N5811
 Possible SMS replacements for stud mount:
1N5812, 1N5814, 1N5816
SYMBOL VALUE UNIT
Peak Repetitive Reverse Voltage
and
DC Blocking Voltage
1N7066
1N7067
1N7068
Average Rectified Forward Current
(Axial T_L ≤ 55°C; SMS T_EC ≤ 100°C ) ^5/
Peak Surge Current
(8.3 ms pulse, half sine wave, superimposed on Io, V_RWM = rated,
allow junction to reach equilibrium between pulses, T_A= 25°C)
Operating & Storage Temperature
Thermal Resistance
Junction to Lead for Axial, L =.125"
Junction to End Tab for Surface Mount
V_RRM
V_RWM
V_R
I_O
I_FSM
T_J and
T_STG
R_θJL
R_θJE
100
150
200
10
350
-65 to
+175
8
4.5
Volts
Amps
Amps
°C
°C/W
NOTES:
1/ For ordering information, price, operating curves, and availability- contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Unless otherwise specified, all electrical characteristics @ 25°C.
4/ I_F = 1A, I_R = 1A, I_RR = 0.1A, T_A = 25°C
5/ Operating at higher I_O currents may be achieved based on specific application
. and device mounting if T_J is maintained below 175°C.
Axial Leaded
SMS
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0119J
DOC