RC0112B_15 Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – STANDARD RECOVERY RECTIFIER

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information ^1/
SPD __ __ __
│ │ └ Screening ^2/
││
__ = Not Screened
││
TX = TX Level
││
TXV = TXV
││
S = S Level
││
│ └ ^{Package Type}
│ ^{__ = Axial Leaded}
│ SMS = Surface Mount Square Tab
│
└
Voltage/Family
5550 = 200V
5551 = 400V
5552 = 600V
5553 = 800V
5554 = 1000V
SPD5550
Thru
SPD5554 Series
5 AMPS, 200 thru 1000 VOLTS
2 μsec
STANDARD RECOVERY
RECTIFIER
FEATURES:
• Standard Recovery: 2 μsec maximum
• PIV up to 1000 Volts
• Low Reverse Leakage Current
• Hermetically Sealed
• Single Chip Construction
• Replacement for 1N5550 thru 1N5554 Series
• Low Thermal Resistance
• For Higher Voltages-See SSDI p/n SDR6557 Series
• TX, TXV, and Space Level Screening Available^2/
• Fast Recovery Versions Available. Contact Factory.
MAXIMUM RATINGS
Symbol
Value
Units
SPD5550
Peak Repetitive Reverse Voltage and
DC Blocking Voltage
SPD5551
SPD5552
SPD5553
SPD5554
V_RRM
V_RWM
V_R
Average Rectified Forward Current
(Resistive Load, 60 Hz, Sine Wave)
T_EC=130^oC (SMS)
T_L=30^oC at .375” (Axial)
I_O
T_A=55^oC PCB Mount
Peak Surge Current
(8.3 ms Pulse, Half Sine Wave, Superimposed on I_O, allow junction to I_FSM
reach equilibrium between pulses, T_A=25^oC)
Operating and Storage Temperature
T_OP & T_stg
Maximum Thermal Resistance
Junction to Lead, L = 0.375” (Axial Lead)
Junction to End Tab (Surface Mount
R_θJL
R_θJE
200
400
600
800
1000
5.0
1.3
1.3
100
-65 to +175
22
6.5
Volts
Amps
Amps
o_C
o_C/W
Axial Leaded (__)
Square Tab Surface Mount (SMS)
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0112B
DOC