PM0021_15 Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – DIODE BRIDGE ASSEMBLY

Solid State Devices, Inc.
14830 Valley View Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
FEATURES:
• 100kHz Operation
• Airborne Application up to 50,000 ft
• High Efficiency
• Low EMI / Corona Discharge
• Thermally Conductive Aluminum Base Plate
• Helicoil Mounting Inserts
• ESS Screening Available. Consult Factory.
• Exterior Surfaces Sandblasted to Promote Adhesion of
Encapsulation in Subsequent Assembly
SPA547-01
HYPERFAST HIGH VOLTAGE
DIODE BRIDGE ASSEMBLY
10.5 kV / 1.5A
MAXIMUM RATINGS (Per Leg, Unless Otherwise Specified)
Peak Repetitive Reverse Voltage and
DC Blocking Voltage
Half Wave Rectified Forward Current
Averaged Over Fully Cycle
(Resistive Load, 60 Hz, Sine Wave, T_C =100^oC)
Peak Surge Current
(T_C =55^oC, 8.3 ms Pulse, Superimposed on Rated Current at Rated Voltage)
Maximum Individual Partial Discharge
(V = 15kV, t = 1min, All Terminals in Common to Base)
Maximum Dielectric Voltage
Operating Temperature Range (Base plate)
Storage Temperature Range
Maximum Thermal Resistance (Per Diode)
Junction to Case
Electrical Schematic
E16
E14
E12
E10
E8
Symbol
V_RRM
V_R
I_O
Value
3,000
Units
Volts
0.8
Amps
I_FSM
V_DIEL
T_{OP BASE}
T_STG
R_θJC
40
Amps
10
15,000
-45 to +100
-55 to +150
15
pC
Volts
o_C
o_C
ºC/W
E6
E4
E2
19
E17
E15
E13
E11
E9
E7
E5 E3
E1
NOTE: All specifications are subject to change without notification.
SCD’s for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: PM0021D
DOC