|
1N7066FL Datasheet, PDF (1/3 Pages) Solid States Devices, Inc – 10 AMP SOLAR ARRAY BYPASS BLOCKING DIODE 100 - 200 VOLTS | |||
|
1N7066FL thru 1N7068FL
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
ssdi@ssdi-power.com * www.ssdi-power.com
Designerâs Data Sheet
Part Number/Ordering Information 1/
1N70 __ __ __
Series
10 AMP
SOLAR ARRAY BYPASS /
BLOCKING DIODE
100 â 200 VOLTS
â â â Screening 2/
ââ
__ = Not Screened
ââ
TX = TX Level
ââ
TXV = TXV Level
ââ
S = S Level
ââ
â
â
â
â Package Type
FL = Flat Leads
â
â Voltage/Family
â 66 = 100V
67 = 150V
68 = 200V
FEATURES:
ï· Flat leads provides stress relief (customizable to
customer specifications)
ï· Ideal for welding to BUS bar
ï· Solid silver leads eliminates plating issues
ï· PIV to 200 volts
ï· High surge current: 350 A maximum
ï· Hermetically sealed
ï· Low forward voltage drop .95 @10A
ï· Void free ceramic frit glass construction
ï· High temperature category I eutectic metallurgical
bond
ï· Hyper fast reverse recovery: 30ns maximum4/
ï· TX, TXV, and S-level screening available2/
ï· Higher current replacements for: 1N5807, 1N5809,
1N5811
TYPICAL APPLICATIONS:
ï· Photovoltaic (PV) panels
MAXIMUM RATINGS 3/
Peak Repetitive Reverse Voltage
and DC Blocking Voltage
1N7066FL
1N7067FL
1N7068FL
Average Rectified Forward Current
(Axial TL ⤠55°C) 5/
Peak Surge Current
(8.3 ms pulse, half sine wave, superimposed on Io, VRWM = rated,
allow junction to reach equilibrium between pulses, TA= 25°C)
Operating & Storage Temperature
Thermal Resistance
Junction to Lead, L =.125"
SYMBOL
VRRM
VRWM
VR
IO
IFSM
TJ and TSTG
RθJL
VALUE
100
150
200
10
350
-65 to +175
8
UNIT
Volts
Amps
Amps
°C
°C/W
NOTES:
1/ For ordering information, price, operating curves, and availability- contact
factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
3/ Unless otherwise specified, all electrical characteristics @ 25°C.
4/ IF = 1A, IR = 1A, IRR = 0.1A, TA = 25°C
5/ Operating at higher IO currents may be achieved based on specific application
and device mounting if TJ is maintained below 175°C.
Flat Leads
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0180A
DOC
|
▷ |