1N7066 Datasheet, PDF (1/2 Pages) Solid States Devices, Inc – 10 AMP 50 -150 VOLTS 30 ns HYPERFAST RECOVERY RECTIFIER

PRELIMINARY
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information ^1/
1N70 __ __ __
│ │ └ Screening ^2/
││
__ = Not Screened
││
TX = TX Level
││
TXV = TXV
││
S = S Level
││
│ └ ^{Package Type}
│ ^{__ = Axial Leaded}
│ SMS = Surface Mount Square Tab
│
└
Voltage/Family
66= 50V
67 = 100V
68 = 150V
1N7066 thru 1N7068
and
1N7066SMS thru 1N7068SMS
10 AMP
50 ─ 150 VOLTS
30 ns HYPERFAST RECOVERY
RECTIFIER
FEATURES:
• Hyper Fast Reverse Recovery: 30ns Maximum^4/
• High Surge Current: 325 A Maximum
• Hermetically Sealed
• Low Forward Voltage Drop .95 @10A
• Void Free Chip Construction
• Solid Silver Leads
• Available in Axial & Square Tab Versions
• TX, TXV, and S-Level Screening Available ^2/
• Axial Lead Higher Current Replacements for:
1N5807, 1N5809, 1N5811
• Possible SMS Replacements for Stud Mount :
1N5812, 1N5814, 1N5816
MAXIMUM RATINGS ^3/
RATING
SYMBOL VALUE UNIT
Peak Repetitive Reverse
Voltage
And
DC Blocking Voltage
1N7066
1N7067
1N7068
V_RRM
V_RWM
V_R
50
100
Volts
150
Average Rectified Forward Current (Axial TL ≤ 55°C; SMS TEC ≤ 100°C ) ^5/
Peak Surge Current
(8.3 ms pulse, half sine wave, superimposed on Io, allow
junction to reach equilibrium between pulses, T_A = 25°C)
Operating & Storage Temperature
Thermal Resistance
Junction to Lead for Axial, L =.125"
Junction to End Tab for Surface Mount
I_O
I_FSM
T_J and
T_STG
R_θJL
R_θJE
10
325
-65 to +175
8
4.5
Amps
Amps
°C
°C/W
NOTES:
1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory.
2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request.
3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC.
4/ I_F = 1A, I_R = 1A, I_RR = 0.1A, T_A = 25°C
5/ Operating at higher Io currents may be achieved based on specific application
and device mounting if Tj is maintained below 175ºC.
Axial Leaded
SMS
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0119C
DOC