1N6626 Datasheet, PDF (1/2 Pages) Microsemi Corporation – ULTRA FAST RECTIFIERS

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: [phone] * Fax: [phone]
[e-mail] * www.ssdi-power.com
Designer’s Data Sheet
Part Number/Ordering Information^1/
1N __ __ __
│ │ └ Screening^2/
││
││
││
││
__ = Not screened
TX = TX Level
TXV = TXV Level
S = S Level
││
│ └ ^{Package Type}
│
__ = Axial Leaded
│
SMS = Surface Mount Square Tab
│
└
Voltage/Family
6626 = 200V
6630 = 900V
6627 = 400V
6631 = 1000V
6628 = 600V
6631A = 1100V
6629 = 800V
6631B = 1200V
1N6626 – 1N6631
Series
2.3 – 1.8 AMP
HYPER FAST RECOVERY
RECTIFIER
200 - 1200 VOLTS
30 - 60 nsec
FEATURES:
 Hyper Fast Recovery: 30 - 60 nsec maximum
 PIV up to 1200 Volts
 Low Reverse Leakage Current
 Hermetically Sealed
 Void Free Construction
 For High Efficiency Applications
 Typical Weight: 0.75 g (Axial Leaded); 0.45 g (SMS)
 TX, TXV, and Space Level Screening Available^2/
 QPL registered devices per MIL-PRF-19500/590 may be
available, contact factory
MAXIMUM RATINGS^3/
SYM VALUE UNIT
1N6626
200
Peak Repetitive Reverse Voltage and
DC Blocking Voltage
1N6627
400
1N6628
1N6629
1N6630
1N6631
V_RRM
V_RWM
V_R
600
800
900
1000
V_DC
1N6631A
1100
1N6631B
1200
Average Rectified Forward Current^4/
(Average current with a half sine wave including reverse voltage
amplitude equal to the magnitude of the full rated V_RWM)
1N6626 - 6628
1N6629 - 6631
I_O1
2.3
1.8
A
Peak Surge Current
1N6626 - 6630
(t_p = 8.3 ms Pulse, Half Sine Wave, Superimposed on I_O, T_A = 25^oC)
1N6631
I_FSM
75
60
A
Storage Temperature
T_stg -65 to +175 ^oC
Maximum Operating Temperature
T_J
+150
o_C
Maximum Thermal Resistance
Junction to Lead, L = 0.375” (Axial Lead) R_JL
Junction to End Tab (Surface Mount) R_JE
NOTES:
Axial Leaded (__)
1/ For ordering information, price, operating curves, and availability- Contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on request.
22
6.5
o_C/W
Square Tab
Surface Mount
(SMS)
3/ Unless otherwise specified, all electrical characteristics @ 25°C.
4/ Derate linearly 1.33 percent/°C for T_L > +75°C (Axial Leaded); Derate linearly 2.5
percent/°C for T_EC > +110°C (SMS).
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0179A
DOC