 English |
|
|
|
|
|
|
|
| SS8014G Datasheet, PDF (1/6 Pages) Silicon Standard Corp. – 150mA Low-Noise LDO Regulator | |||
| |||
|
SS8014G
150mA Low-Noise LDO Regulator
FEATURES
Low output noise of 170µV (rms)
Ultra-low no-load supply current of 52µA
Low dropout of 100mV at 50mA load
Guaranteed 150mA output current
Over-temperature and short-circuit protection
Output voltage adjustable from 2.5V to 5.5V
Max. supply current in shutdown mode < 1µA
APPLICATIONS
Notebook Computers
Cellular Phones
PDAs and other hand-helds
Digital Still Cameras and Video Recorders
Bar-code Scanners
DESCRIPTION
The SS8014G is a low supply-current, low-dropout linear
regulator that comes in a space-saving SOT23-5 package.
The supply current at no-load is 52µA. In the shutdown
mode, the maximum supply current is less than 1µA.
Operating voltage range of the SS8014G is from 2.5V to
5.5V. The over-current protection limit is set at 370mA
typical and 150mA minimum. An over-temperature pro-
tection circuit is built-in to the SS8014G to prevent thermal
overload. These power saving features make the SS8014G
ideal for use in such battery-powered applications as
notebook computers, cellular phones, and PDAâs.
ORDERING INFORMATION
SS8014GTR
SS8014 in Pb-free SOT-23-5
shipped on tape and reel
This device is only available with Pb-free lead finish (second-level interconnect).
PIN CONFIGURATION
IN 1
5 OUT
GND 2 SS8014G
SHDN 3
SOT23-5
4 ADJ
TYPICAL CIRCUIT
+
-
BATTERY
CIN
1 µF
IN
OUT
SS8014G
ADJ
SHDN
GND
OUTPUT
VOLTAGE
R1
R2
COUT
1 µF
470 pF
Adjustable mode
VOUT=1.250 X ( R2/R1+1)
1/12/2005 Rev.2.11
www.SiliconStandard.com
1 of 6
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese