SS8012G Datasheet, PDF (1/6 Pages) Silicon Standard Corp. – Rail-to-Rail I/O Op. Amp.

Features
Single-supply operation: 2.0V to 5.5V
Low supply current: 700 µA
Wide bandwidth: 3 MHz
Slew rate: 1 V/µs
No phase reversal
Unity-gain stable
Small 5-pin SOT-23-5 package
Applications
Battery-Powered Instruments
Portable Equipment
Audio Signal Conditioning
Multimedia Audio
ASIC Input or Output Amplifier
SS8012G
Rail-to-Rail I/O Op. Amp.
Description
The SS8012G is a single-supply amplifier supporting
rail-to-rail input and output. High output current makes
these amplifiers excellent for driving either resistive or
capacitive loads. AC performance is very good with
3.0MHz bandwidth.
The very low input bias currents allow the SS8012G to
be used for integrators and diode amplification and
other applications requiring low input bias current. The
supply current is only 700µA per amplifier at 3.0V,
allowing low current applications to control high cur-
rent loads.
Applications include audio amplification for computers,
sound ports, sound cards and set-top boxes. The
SS8012G is very stable and capable of driving capacitive
loads. The ability to swing rail-to-rail at the inputs and
outputs enables designers to buffer CMOS ADC/DACs,
ASICs or other wide output swing devices in single-
supply systems.
Ordering Information
SS8012GTR : SS8012 in SOT-23-5 with Pb-free lead finish,
shipped on tape and reel.
This device is only available with Pb-free lead finish (second-level interconnect).
Pin Configuration
OUT ¹
5 ^VSS
V_{DD 2}
IN+ 3
+
-
SOT-23-5
4 IN-
Typical Application Circuit
VDD
2
IN
3₊
SS8012G ¹
4_-
OUT
5
RL
2kΩ
8/21/2004 Rev.2.01
www.SiliconStandard.com
1 of 6