SS6802 Datasheet, PDF (1/10 Pages) Silicon Standard Corp. – TWO-CELL LITHIUM-ION BATTERY PROTECTION IC

SS6802
TWO-CELL LITHIUM-ION
BATTERY PROTECTION IC
FEATURES
Ultra-Low Quiescent Current at 10µA (V_CC=7V,
V_C=3.5V).
Ultra-Low Power-Down Current at 0.2µA (V_CC
=3.8V, V_C=1.9V).
Wide Supply Range: 2 to 18V.
Precision Overcharge Protection Voltage
4.35V ± 30mV for the SS6802A
4.30V ± 30mV for the SS6802B
4.25V ± 30mV for the SS6802C
Built-in Delay Circuits for Overcharge,
Over-discharge and Overcurrent Protection.
Overcharge and Overdischarge Delay Time
can be Extended by External Capacitors.
Built-in Cell-balancing Bleeding Network under
Overcharge Condition.
DESCRIPTION
The SS6802 battery protection IC is designed
to protect lithium-ion batteries from damage due
to overcharging, overdischarging, and
overcurrent for two series cells in portable
phones and laptop computers. It can be a part
of the low-cost charge control system within a
two-cell lithium-ion battery pack.
Safe and full utilization charging is ensured by
the accurate ±30mV overcharge detection.
Three different specification values for
overcharge protection voltage are provided for
various protection requirements. The very low
standby current drains little current from the
cells while in storage.
APPLICATIONS
Protection IC for Two-Cell Lithium-Ion Battery
Pack.
Pb-free; RoHS-compliant
TYPICAL APPLICATION CIRCUIT
V_BAT+
BATTERY 1
**R1
C1
1µF
8 _VCC
6 _VC
TC ⁵
TD ³
*C_TC
BATTERY 2
M1
CEM9926
C2
1µF
**R2
4 _GND
2 _OD
OC ¹
*C_TD
R3
CS ⁷
1M
SS6802
Q1
R6
1K ^M2
CEM9926
*C_TC & C_TD are optional for delay time adjustment.
**R1 & R2: Refer application informations.
R4
1M
C3
R5
0.01µF ^1M
V_BAT -
Protection Circuit for Two-Cell Lithium-Ion Battery Pack
02/26/2008 Rev.1.00
www.SiliconStandard.com
1