1SMA4741 Datasheet, PDF (1/4 Pages) Transys Electronics – SURFACE MOUNT SILICON ZENER DIODE

1SMA4741 thru 1SMA200Z
SURFACE MOUNT SILICON ZENDER DIODE
PRODUCT SUMMARY
1.0 Watts Surface Mount
FEATURES
For surface mounted applications in order to
optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
Typical IR less than 5.0uA above 11V
High temperature soldering guaranteed:
260°C / 10 seconds at terminals
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
MECANICAL DATA
Case: Molded plastic over passivated junction
Terminals: Pure tin plated lead free,
solderable per MIL-STD-750, Method 2025
Polarity:Color Band denotes positive end
(cathode)
Standard packaging: 12mm tape (EIA-481)
Weight: 0.002 ounces, 0.064 gram
SMA/DO-214AC
Dimensions in inches and (millimeters)
Pb-free; RoHS-compliant
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
o
(Ratings at 25 C ambient temperature unless otherwise specified.)
Type Number
Symbol
Value
Units
Peak Power Dissipation at TA=50^oC, Derate above
50 ^oC ( Note 1 )
P_D
1.0
6.67
Watts
mW/ ^oC
Peak Forward Surge Current, 8.3 ms Single Half
Sine-wave Superimposed on Rated Load
(JEDEC method) ( Note 2 )
I_FSM
10.0
Amps
Operating and Storage Temperature Range
T_J, T_STG
-55 to + 150
o_C
Notes: ^{1. Mounted on 5.0mm2 (0.013mm thick) land areas.}
2. Measured on 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per
Minute Maximum
08/22/2007 Rev.1.00
www.SiliconStandard.com
1