SA Datasheet, PDF (2/3 Pages) Taiwan Semiconductor Company, Ltd – Transient Voltage Suppressor Diodes

P6K^SAE⁽⁵S⁰⁰E^WR⁾ I^SE^eS^ries
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE - 5.0 to 180 Volts
500 Watt Peak Power / 3.0 Watt Steady State
DO-204AC
(DO-15)
FEATURES
◎ Plastic package
◎ Glass passivated chip junction in DO-15 Package
◎ 600W surge capability at 10/1000 µs wave form
1.0 (25.4)
MIN.
◎ Excellent clamping capability
◎ Low zener impedance
0.140 (3.6)
0.104 (2.6)
DIA.
◎ Fast response time: typically less than 1.0ps from 0 Volts to BV min.
◎ Typical IR less than 1µA above 10V
◎ High temperature soldering guaranteed: 265°C/10 seconds/.375",
0.300 (7.6)
0.230 (5.8)
(9.5mm) lead length, 5lbs., (2.3kg) tension
◎ Pb-free plated
MECHANICAL DATA
Case: JEDEC DO-15 Molded Plastic
Terminal: Solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes cathode except Bipolar
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
Mounting Position: Any
Weight: 0.015 ounce, 0.4 grams
Dimensions in inches and(millimeters)
DEVICES FOR BIPOLAR APPLICATION
For Bidirectional use C or CA Suffix for types SA5.0 thru types SA180 (e.g. SA5.0C , SA180CA)
Electrical characteristics apply in both directions
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
RATING
SYMBOL VALUE UNITS
Peak Pulse Power Dissipation at T_A = 25℃ , T_P = 1ms (Note 1)
P_PPM
Minimum
500
Watts
Steady State Power Dissipation at T_L = 75℃ ,Lead
lengths.375",(9.5mm) (Note 2)
P_M(AV)
3
Watts
Peak Forward Surge Current,8.3ms Single Half Sine-Wave
Superimposed on Rated Load,(JEDEC Method) (Note 3)
I_FSM
70
Amps
Operating junction and Storage Temperature Range
T_J , T_STG
-55 to
+ 175
℃
Notes :
1.Non-repetitive current pulse , per Fig. 3 and derated above T_A = 25℃ per Fig. 2 .
2.Mounted on Copper Pad area of 1.6×1.6" (40×40mm) per Fig. 5.
3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
REV.2014.05.01
02 | www.spsemi.cn