TVS-SACB Datasheet, PDF (1/4 Pages) StarHope – Low Capacitance Transient Voltage Suppressor Stand-Off Voltage - 5.0 to 50 Volts 500 Watt Peak Pulse Power

SPSEMI
SACB(500W) Series
Low Capacitance Transient Voltage Suppressor
Stand-Off Voltage - 5.0 to 50 Volts
500 Watt Peak Pulse Power
Features
For surface mounted applications in order to optimize board space
Glass passivated junction
500W Peak Pulse Power capability with a 10/1000us waveform,
repetition rate (duty cycle): 0.01%
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less than 1.0ps from 0 Volts to V(BR)
for unidirectional types
Ideal for data line applications
High temperature soldering guaranteed: 260°C/10 seconds,
0.375"(9.5mm) lead length,5lbs., (2.3kg) tension
Mechanical Data
Case: JEDEC DO-214AA. Molded plastic over glass passivated junction
Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
Polarity: The band denotes TVS cathode
Standard Packaging:12mm tape (EIA STD RS-481)
Weight:0.003ounce,0.093gram
Maximum Ratings And Characteristics
Ratings at 25℃ambient temperature unless otherwise specified.
RATING
SYMBOL VALUE
Peak Pulse Power Dissipation on 10/1000μs waveform (Note 1)
Steady State Power Dissipation at TL= 75°C with lead lengths or 0.375"
(9.5mm)
Peak Pulse Power Surge Current with a 10/1000 μS waveform
(Note1.FIG.3)
Operating junction and Storage Temperature Range
PPPM
P M ( AV )
IPPM
TJ , TSTG
Notes :
1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25℃ per Fig. 2 .
Minimum
500
3
SEE
TABLE1
-55 to
+175
UNITS
Watts
Amps
Amps
℃
REV.2016.08.10
www.spsemi.cn
Page 1 of 4