TVS-1KE Datasheet, PDF (1/6 Pages) StarHope – Glass Passivated Junction Transient Voltage Suppressor Stand-Off Voltage - 6.8 to 550 Volts 1500 Watt Peak Pulse Power/6.5 Watt Steady State

SPSEMI
1.5KE(1500W) Series
Glass Passivated Junction Transient Voltage Suppressor
Stand-Off Voltage - 6.8 to 550 Volts
1500 Watt Peak Pulse Power/6.5 Watt Steady State
Features
Plastic package
Glass passivated chip junction in DO-201 Package
1500W surge capability at 10/1000 μs wave form
Excellent clamping capability
Low zener impedance
Fast response time: typically less than 1.0ps from 0 Volts to BV min.
Typical IR less than 1μA above 10V
High temperature soldering guaranteed: 265°C/10 seconds/.375",
(9.5mm) lead length, 5lbs., (2.3kg) tension
Pb-free plated
Mechanical Data
Case: JEDEC DO-201 Molded plastic
Terminals: Solderable per MIL-STD-750,Method 2026
Polarity: Color band denotes cathode except Bipolar
Mounting Position: Any
Weight: 0.045 ounce, 1.2 grams
Devices For Bipolar Application
For Bidirectional use C or CA Suffix for types 1.5KE6.8 thru types 1.5KE550 (e.g. 1.5KE6.8C , 1.5KE550CA)
Electrical characteristics apply in both directions
Maximum Ratings And Characteristics
Ratings at 25℃ambient temperature unless otherwise specified.
RATING
SYMBOL VALUE
UNITS
Peak Pulse Power Dissipation at TA =25℃,TP = 1ms (Note 1)
Steady State Power Dissipation at TL =75℃,Lead
lengths.375",(9.5mm) (Note 2)
Peak Forward Surge Current,8.3ms Single Half Sine-Wave
Superimposed on Rated Load,(JEDEC Method) (Note3)
Operating junction and Storage Temperature Range
PPPM
P M ( AV )
Minimum
1500
6.5
IFSM
TJ , TSTG
200
-55 to
+175
Watts
Watts
Amps
℃
Notes :
1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25℃ per Fig. 2 .
2.Mounted on Copper Pad area of 1.6×1.6" (40×40mm) per Fig. 5
3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
REV.2016.08.10
www.spsemi.cn
Page 1 of 6