TVS-15KPA Datasheet, PDF (1/5 Pages) StarHope – Glass Passivated Junction Transient Voltage Suppressor Stand-Off Voltage - 17 to 280 Volts 15000 Watt Peak Pulse Power

SPSEMI
15KPA(15KW) Series
Glass Passivated Junction Transient Voltage Suppressor
Stand-Off Voltage - 17 to 280 Volts
15000 Watt Peak Pulse Power
Features
Plastic package
Glass passivated chip junction
15000W Peak Pulse Power capability on 10/1000μs waveform
Excellent clamping capability
Repetition rate (duty cycle):0.05%
Low incremental surge resistance
Fast response time: typically less than 1.0ps from 0 Volts to BV min.
High temperature soldering guaranteed: 265°C/10 seconds/.375",
(9.5mm) lead length, 5lbs., (2.3kg) tension
Pb-free plated
Mechanical Data
Case: Molded plastic over glass passivated junction
Terminals: Solderable per MIL-STD-750,Method 2026
Polarity: Color band denotes positive end (cathode) except Bipolar
Mounting Position: Any
Weight: 0.07 ounce, 2.5 grams
Devices For Bipolar Application
For Bidirectional use C or CA Suffix for types 15KPA17 thru types 15KPA280 (e.g. 15KPA17C , 15KPA280CA)
Electrical characteristics apply in both directions
Maximum Ratings And Characteristics
Ratings at 25℃ambient temperature unless otherwise specified.
RATING
SYMBOL VALUE
UNITS
Peak Pulse Power Dissipation on 10/1000μs waveform (Note 1,FIG.1)
Peak Pulse Current of on 10/1000μs waveform (Note 1,FIG.3)
Steady State Power Dissipation at TL =75℃,Lead
lengths.375",(9.5mm) (Note 2)
PPPM
IPPM
P M ( AV )
Minimum
15000
SEE
TABLE 1
8
Watts
Amps
Watts
Peak Forward Surge Current,1/20 second / 25℃ (JEDEC Method)
IFSM
400
Amps
Operating junction and Storage Temperature Range
TJ , TSTG
-55 to
+175
℃
Notes :
1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25℃ per Fig. 2 .
2.Mounted on Copper Pad area of 0.8×0.8" (20×20mm) per Fig. 5
3.8.3ms single half sine-wave , or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
REV.2016.08.10
www.spsemi.cn
Page 1 of 5