FSP200-61DL48V Datasheet, PDF (1/1 Pages) Sparkle Power Inc. – Internal 12V DC fan included

Sparkle Power Inc.
A Leading Power Supply Manufacturer
Web site: www.sparklepower.com
FSP200-61DL (48V)
(RoHS Compliant)
200 Watts Flex DC to DC Switching Power
Supply
Features
• Compatible with European Union Directive 2002/95/EC
(Restriction on Hazardous Substances).
• High efficiency and reliability
• Remote ON/OFF function
• Internal 12V DC fan included
• Low noise and ripple
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Complies with FCC part 15 subpart J class B 115Vac operation,
and CISPR 22 class B at 230Vac operation
• Approved by : UL/CUL60950-1 2^nd, TUV EN60950-1 2^nd, CB 60950-1
2^nd , FCC, EMC
Specification
• Temperature Range: Operating: 0°C ~ +50°C; storage &
shipping: -20°C ~ +80°C
• Humidity: 5~95% on operating & storage
• Dielectric Withstand: Primary frame ground 1800V AC for
2 second
• Efficiency: 80% minimum
• Rise time: Less than 20ms
• Power Good Signal: Power on delay time 100 ~ 500ms, off
delay 1ms minimum (TTL and CMOS compatible)
• MTBF: 100,000 hours on maximum load at +25°C
• Dimensions (LxWxH): 150x81.5x40.5mm / 6x3.2x1.6inch
Input Characteristics
Input Range: 36 ~ 72Vdc. Normal 48Vdc.
Input Current: 48Vdc, Max 8A
Inrush Current: No damage.
Output Characteristics
Output Voltage
+3.3V
+5V
+12V
-12V
+5Vsb
Minimum Load
0.0A
1.0A
1.0A
0.0A
0.0A
Normal Load
6A
6A
8A
0.25A
1.0A
Maximum Load
12A
12A
16A
0.5A
2.0A
Load Reg.
± 5%
± 5%
± 5%
± 10%
± 5%
Ripple & Noise
50mV P-P
50mV P-P
120mV P-P
120mV P-P
50mV P-P
*+3.3V and +5V total output not exceed 80W
* Total output for this subject power supply is 200W
Sparkle Power Inc.
Main Office
1000 Rock Avenue
San Jose, CA 95131
TEL: [phone]
FAX: [phone]
E-MAIL: [e-mail]
Sparkle Power Inc.
Los Angeles Office
17071 Green Drive
City of Industry, CA 91745
TEL: [phone]
FAX: [phone]