MM9XMS-1 Datasheet, PDF (1/1 Pages) Spectrum Microwave, Inc. – Double Balanced Mixer

Double Balanced Mixer
Ultra-Broadband
Electrical Specifications : ⁽¹⁾
Model MM9xMS-1
Model MM9xMS-17
RF 1.8 to 20.0 GHz
Conditions
Specifications
Parameter
SSB Conversion
loss:^{(2) (3)}
Isolation
LO to RF:
LO to IF:
RF to IF:
IF to RF:
Input 1-dB
Compression Point:
Input Third Order
Intercept Point:
LO Power: ⁽⁴⁾
RF(GHz)
3.0-19.0
1.8-20.0
1.8-20.0
1.8-20.0
1.8-20.0
1.8-20.0
1.8-20.0
LO(GHz)
3.0-19.0
1.8-20.0
1.8-20.0
IF(MHz) Min
DC-400
DC-400
DC-800
Typical
5.5 dB
5.8 dB
7.2 dB
Max
7.5 dB
8.5 dB
10.5 dB
1.8-20.0
4.0-19.0
1.8-20.0
1.8-20.0
1.8-20.0
1.8-20.0
DC-800
DC-800
DC-800
DC-800
20 dB
15 dB
12 dB
28 dB
23 dB
22 dB
28 dB
40 dB
+2 dBm
+5 dBm
+8 dBm
+12 dBm
+11 dBm
+14 dBm
+17 dBm
+23 dBm
+7 dBm
+10 dBm
+14 dBm
+18 dBm
MM93
MM94
MM96
MM97
MM93
MM94
MM96
MM97
MM93
MM94
MM96
MM97
Notes:
1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the
nominal LO power. Specifications indicated as typical are not guaranteed.
2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz.
3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C.
4. Usable LO drives are up to 2 dB below and 3 dB above nominal.
5. See Application Note M112, for aid in selecting the outline and for mounting and installation information.
MM9xMS-1
Outline: MS3C
Typical
Performance
at 25˚C
LO Power
3 = +7 dBm
4 = +10 dBm
6 = +14 dBm
7 = +19 dBm
MM9xMS-17
Outline: MS3D
All dimensions are in inches and [mm].
ECTRU
MHz
MICROWAVE
A Spectrum Control Business _{SPECTRUM MICROWAVE • 2144 Franklin Drive N.E. • Palm Bay, Florida 32905 • Phone: [phone] • Fax: [phone]}
www.specwave.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: [phone] • Fax: [phone]
635