English
Language : 

MDR3100 Datasheet, PDF (1/1 Pages) Spectrum Microwave, Inc. – Dielectric Resonator Oscillator
Dielectric Resonator Oscillator Model MDR3100
AFC Voltage Tunable
2.5 to 21.0 GHz
Specifications : (1)
Frequency Range: (2)
Mechanical Tuning Bandwidth (min.)
Stability (max.)(3)
Pulling, 12 dB RL (max.)
Pushing (max.)
Harmonics (max.)
Spurious (max.)
Output Power (min.) (4)
2.5-6.0 GHz
±10 MHz
5 ppm/°C
±100 ppm
20 ppm/Volt
-15 dBc
-70 dBc
+10 dBm
6.0-21.0 GHz
±20 MHz
5 ppm/°C
±100 ppm
20 ppm/Volt
-15 dBc
-70 dBc
+10 dBm
Frequency
(GHz)
2.5 to 5.0
4.0 to 10.0
10.0 to 14.0
14.0 to 21.0
Outline
DA3A
DA2A
DB1A
DA6A
Phase Noise (typ.)
10 kHz Offset, dBc/Hz
100 kHz Offset, dBc/Hz
1 MHz Offset, dBc/Hz
3 GHz
-103
-128
-148
6 GHz
-97
-122
-142
12 GHz
-91
-116
-136
20 GHz
-83
-108
-128
AFC Tuning BW (min)
AFC Tuning Voltage(5)
AFC Tuning Impedance
Input DC(6)
Operating Temperature
RF Connector
DC Connector
2.5 - 10.0 GHz: 800 ppm
10.0 - 21.0 GHz: 600 ppm
+2 to +10 VDC
Parallel R-C 10K min./300 pf max
+12 VDC ±3% @ 125 mA max.
-20 to +65 °C
SMA Female
Solder Pin
Notes:
1. Specifications labeled “min.” or “max.” are guaranteed in a 50 Ohm system over the specified temperature range.
2. Output frequency must be specified.
3. Averaged over the full temperature range.
4. Higher output power is available.
5. Other tuning voltages are available.
6. Other input voltages are available.
7. Package must be verified by Spectrum Microwave.
"U"
"J" DIA THRU
PRODUCT LABEL AREA
4 PLACES
THIS SURFACE
AFC INPUT "C"
SMA-FEMALE
"S"
MAX
"F"
"E"
"G"
GND
"A"
"H"
"D"
VDC
"P" MAX
"N" MAX
"M"
"L"
ECTRU
FREQ ADJUST
"I"
COARSE
FINE
NOTE 1
DIM
OUTLINE
"A"
"B"
"C"
"D"
"DA2A" 1.75 1.60 .12 1.500
"DA3A" 1.75 2.00 .12 1.500
"DB1A" 1.65 1.18 .15 1.350
"DA6A" 1.65 1.46 .15 1.350
DIMENSIONS: INCHES
"E" "F" "G" "H" "J"
.30 1.000 .25 1.25 .125
.50 1.000 .25 1.25 .125
.22 .750 .32 1.00 .125
.36 .726 .32 1.00 .140
"B"
"R"
RF OUTPUT
SMA-FEMALE
"K"
1. Outline DD4 uses a seperate adjustment screw for coarse and fine tune vs.
the concentric adjustment shown.
"K" "L" "M" "N" "P" "R" "S" "T" "U"
.83 .98 .19 1.70 2.00 .38 .40 1.00 .53
.83 .96 .19 1.75 2.00 .38 .40 1.00 .53
.84 .77 .19 1.55 1.55 .38 .40 .89 .77
.83 .71 .16 1.55 1.70 .38 .40 .83 .71
DIMENSIONS: METRIC
"A" DIM
OUTLINE
"B"
"C"
"D" "E"
"F"
"G" "H"
"J" "K"
"L" "M" "N" "P" "R" "S" "T" "U"
"DA2A" 44.5 40.6 3.0 38.10 7.6 25.40 6.4 31.8 3.2 21.1 24.9 4.8 43.2 50.8 9.7 10.2 25.4 13.5
"DA3A" 44.5 50.8 3.0 38.10 12.7 25.40 6.4 31.8 3.2 21.1 24.4 4.8 44.5 50.8 9.7 10.2 25.4 13.5
"DB1A" 41.9 30.0 3.8 34.29 5.6 18.42 8.1 25.4 3.2 21.3 19.6 4.8 39.4 39.4 9.7 10.2 22.6 19.6
"DA6A" 41.9 37.1 3.8 34.29 9.1 18.44 8.1 25.4 3.6 21.1 18.0 4.0 39.4 43.2 9.7 10.2 21.1 18.0
All dimensions are in inches and [mm].
MICROWAVE
A Spectrum Control Business SPECTRUM MICROWAVE • 2144 Franklin Drive N.E. • Palm Bay, Florida 32905 • Phone: (888) 553-7531 • Fax: (888) 553-7532
www.specwave.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
785