MDR2100 Datasheet, PDF (1/1 Pages) Spectrum Microwave, Inc. – Dielectric Resonator Oscillator

Dielectric Resonator Oscillator Model MDR2100
Free Running, Mechanically Tuned
2.5 to 21.0 GHz
Specifications : ⁽¹⁾
Frequency Range: ⁽²⁾
Mechanical Tuning Bandwidth (min.)
Stability (max.)⁽³⁾
Pulling, 12 dB RL (max.)
Pushing (max.)
Harmonics (max.)
Spurious (max.)
Output Power (min.) ⁽⁴⁾
2.5-6.0 GHz
±10 MHz
5 ppm/ °C
±100 ppm
20 ppm/Volt
-15 dBc
-70 dBc
+10 dBm
6.0-21.0 GHz
±20 MHz
5 ppm/ °C
±100 ppm
20 ppm/Volt
-15 dBc
-70 dBc
+10 dBm
Frequency
(GHz)
2.5 to 6.0
4.0 to 10.0
6.0 to 14.0
10.0 to 14.0
14.0 to 21.0
Outline
DD2A
DD1
DD
DD4
DD6
Phase Noise (typ.)
10 kHz Offset, dBc/Hz
100 kHz Offset, dBc/Hz
1 MHz Offset, dBc/Hz
2.5 GHz
-105
-130
-150
6 GHz
-99
-124
-144
12 GHz
-93
-118
-138
20 GHz
-88
-113
-133
Input DC⁽⁵⁾
Operating Temperature
RF Connector
DC Connector
+12 VDC ±3% @ 125 mA max.
-20 to +65°C
SMA Female
Solder Pin
Notes:
1. Specifications labeled “min.” or “max.” are guaranteed in a 50 Ohm system over the specified temperature range.
2. Output frequency must be specified.
3. Averaged over the full temperature range.
4. Higher output power is available.
5. Alternate input voltage available.
6. Package must be verified by Spectrum Microwave.
PRODUCT LABEL AREA
THIS SURFACE
"S"
"C" MAX
"J" DIA. THRU
4 PLACES
"F" "E"
"G"
"P" MAX
"N" MAX
"M"
"A"
"L"
"H"
GND
"D"
VDC
FREQ ADJUST
COARSE
FINE
Note 1
"B"
"R"
RF OUTPUT
"K"
SMA-FEMALE
DIMENSIONS: INCHES
"A" ^DIM. "B" "C" "D" "E" "F" "G" "H" "J" "K" "L" "M" "N" "P" "R" "S"
OUTLINE
"DD" 1.65 1.46 .15 1.350 .36 .726 .32 1.00 .140 .76 .92 .16 1.55 1.70 .38 .40
"DD1" 1.75 1.60 .12 1.500 .30 1.000 .25 1.25 .125 .83 .98 .19 1.70 2.00 .38 .40
"DD2A" 1.75 2.00 .12 1.500 .50 1.000 .25 1.25 .125 .83 .96 .19 1.75 2.00 .38 .40
"DD4" 1.65 1.18 .15 1.350 .22 .750 .32 1.00 .125 .84 .77 .19 1.55 1.70 .38 .40
"DD6" 1.65 1.46 .15 1.350 .36 .726 .32 1.00 .140 .83 .71 .16 1.55 1.70 .38 .40
"A" ^DIM. "B" "C"
OUTLINE
"DD" 41.9 37.1 3.8
"DD1" 44.5 40.6 3.0
"DD2A" 44.5 50.8 3.0
"DD4" 41.9 30.0 3.8
"DD6" 41.9 37.1 3.8
DIMENSIONS: MM
"D" "E" "F" "G" "H"
34.29 9.1 18.44 8.1 25.4
38.10 7.6 25.40 6.4 31.8
38.10 12.7 25.40 6.4 31.8
34.29 5.6 19.05 8.1 25.4
34.29 9.1 18.44 8.1 25.4
"J" "K" "L" "M"
3.6 19.3 23.4 4.0
3.2 21.1 24.9 4.8
3.2 21.1 24.4 4.8
3.2 21.3 19.6 4.8
3.6 21.1 18.0 4.0
"N" "P" "R"
39.4 43.2 9.7
43.2 50.8 9.7
44.5 50.8 9.7
39.4 43.2 9.7
39.4 43.2 9.7
"S"
10.2
10.2
10.2
10.2
10.2
1. Outline DD4 uses a separate
adjustment screw for coarse and fine
tune vs. the concentric adjustment
shown.
All dimensions are in inches and [mm].
ECTRU
MICROWAVE
A Spectrum Control Business SPECTRUM MICROWAVE • 2144 Franklin Drive N.E. • Palm Bay, Florida 32905 • Phone: [phone] • Fax: [phone]
www.specwave.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: [phone] • Fax: [phone]
783