M56T Datasheet, PDF (1/1 Pages) Spectrum Microwave, Inc. – Double Balanced Mixer

Double Balanced Mixer
Model M56T
RF Band
RF 10 to 1500 MHz
Electrical Specifications : ⁽¹⁾
Parameter
SSB Conversion loss:⁽²⁾
Isolation
LO to RF:
LO to IF:
Input 1-dB
Compression Point:
Conditions
RF (MHz) LO (MHz) IF (MHz)
10-1200 10-1200 DC-100
10-1500 10-1500 DC-800
Specifications
Min Typical Max
6.5 dB 7.5 dB
7.0 dB
8.5 dB
10-500
500-1500
10-600
600-1500
30 dB
27 dB
27 dB
20 dB
10-1500 10-1500 DC-800
+5.5 dBm
Desensitization Point:
Input Third Order
Intercept Point:
LO Power: ⁽³⁾
10-1500
10-1500
10-1500
10-1500
10-1500
10-1500
DC-800
DC-800
DC-800
+3.5 dBm
+16 dBm
+13 dBm
Notes:
1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the
nominal LO power. Specifications indicated as typical are not guaranteed.
2. SSB Noise figure is nominally within ±0.5 dB of the SSB conversion loss for IF frequencies greater than 10 MHz.
3. Usable LO drives are up to 2 dB below and 3 dB above nominal.
Typical Performance at 25˚C
M56T
Outline: TO-8
SPECTRUM
All dimensions are in inches and [mm].
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH [phone] · Fax [phone]
www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH [phone] · Fax [phone]