52-188-002-A Datasheet, PDF (1/2 Pages) Spectrum Microwave, Inc. – Barrier Strip Filtered Terminal Blocks

Barrier Strip
Filtered Terminal Blocks
The barrier strip filtered terminal block is designed
provide excellent EMI/RFI filtering of AC and DC
power lines and control lines. This terminal block is
available in various sizes, with terminal for soldering
or spade lugs. Application examples include filtering
power supplies in telecommunications equipment,
metering, industrial controls, instrumentation and
EDP equipment.
Features
s UL recognized and CSA approved for DC voltages
s E133076, UL 1059
s LR92537, CSA STD 22.2 N°158-1987 and ECN584B
s Filter element provides high insertion loss
for EMI/RFI filtering of AC and DC power and
control lines
s Rugged construction provides protection to filtering
element; especially useful for repeated changes in
wiring or field connections
s 2 to 6 terminals available (combine if larger number
of terminals needed)
s Cost-effective solution for industrial interconnection
EMI filtering problems
s Termination options available: straight lead,
male or female disconnects, pigtail (12 AWG =
0.081" (2.05mm); 22 AWG = 0.025" (0.64mm)
s Available in RoHS compliant versions
Ordering Information
Example: 52-160-006-A AOO
The part number shown represents a barrier strip terminal block
with six terminals and rated for 20 Amps. Male disconnects
(.250") are the method of termination.
52 –^* 160 – 006
–A
Barrier Strip
Terminal Block
160 - Front panel mount
188 - Rear panel mount
Number
of Terminals
002 - 2 terminals
through
006 - 6 terminals
Current
Rating
A - 20 Amps
For instructions on soldering to filter terminals, please refer to
page 107 in filter plate section.
* Replace “–” with “F” for RoHS complaint version
Specifications
ELECTRICAL
Pi Filter
Operating temperature: -55° C to 105° C
Working voltage:
100VDC
Capacitance:
2,500 pF to 5,200 pF
Dielectric
withstanding voltage: 1700VDC
Current rating:
20A
D.C. resistance:
.01 ohms max.
Typical Insertion Loss — dB:
In 50 Ohm Circuit
30 MHz……22
50 MHz……32
100 MHz……48
300 MHz……70
500 MHz……75
1000 MHz……75
MECHANICAL
Center spacing:
Wire size:
Screw size:
Molded material:
Tightening torque:
Terminal:
.438" (11.1 mm)
AWG #12 max for 20A
20A - #6-32, zinc-plated
philslot screws
Black, UL rated 94VO
thermoplastic
9 in.-lbs. max.
Brass, tin-plated
AOO
.758
(19.3)
Special
Terminations
Code
Note: Leave blank if ordering
standard product.
Male quick disconnects
directly on terminal block.
AO1 . . . . . . .187 (4.8)
.820
(20.9)
1.30
(33.1)
MAX.
®
TYPICAL
.187 (4.8)-AO1
.250 (6.4)-AOO
.032 (.8) THK.
FOR BOTH
AOO . . . . . . .250 (6.4)
Dimensions in inches (mm)
For custom designs see page 127
and consult with factory.
122 ^{SPECTRUM CONTROL INC. • 8031 Avonia Rd. • Fairview, PA 16415 • Phone: [phone] • Fax: [phone] • Web site: www.spectrumcontrol.com}
SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: [phone] • Fax: [phone]