DEV-13262 Datasheet, PDF (2/8 Pages) SparkFun Electronics – CAN-Bus Shield Hookup Guide

We also recommend you have access to the following materials.
CAN-Bus Shield Hookup Guide SparkFun Wish List
MicroSD Card with Adapter - 8GB
COM-11609
This is an 8 gig microSD memory card. It's perfect for massive datalo…
GPS Receiver - EM-506 (48 Channel)
GPS-12751
The EM-506 GPS receiver from [USGlobalSat](http://www.usglobalsa…
Serial Enabled 16x2 LCD - Black on Green 5V
LCD-09393
This is the latest evolution of our serial LCD. Included on a single boa…
Arduino Stackable Header Kit - R3
PRT-11417
These headers are made to work with the Arduino Uno R3, Leonardo…
OBD-II to DB9 Cable
CAB-10087
Once you've hacked everything, why not go out in the garage and ha…
SparkFun RedBoard - Programmed with Arduino
DEV-12757
At SparkFun we use many Arduinos and we're always looking for the…
Suggested Reading
If you aren’t familiar with the following concepts, you may want to review
these tutorials before attempting to work with the CAN-Bus Shield.
• Installing Arduino Libraries
• Arduino Shields
• Through-hole Soldering
• MicroSD Shield
• GPS Shield
• Getting Started with OBD-II
Hardware Overview
There are several features to be aware of on the CAN-Bus Shield.
Page 2 of 8
CAN-Bus Shield with features labeled.
1. DB9 Connector
The primary hardware feature on this shield is the DB9 connector. This
allows you to interface to OBD-II ports with a DB9 to OBD-II cable.