SEN-12589 Datasheet, PDF (1/2 Pages) SparkFun Electronics – SparkFun RedBot Sensor - Accelerometer



SparkFun RedBot Sensor - Accelerometer
SEN-12589 ROHS 
Page 1 of 2
 ^{images are CC BY-NC-SA 3.0}
Description: The Accelerometer sensor is an add-on for your RedBot that provides
bump and motion detection. The sensor works by measuring acceleration forces on
the x, y, and z axis. By measuring the amount of acceleration (or lack there of) your
robot can get a better understanding of its movements.
The sensor has two 2x3 headers (one male and one female) which connect directly to
the RedBot Mainboard giving you the ability to stack another I²C sensor. Just use the
included RedBot library to detect bumps and motion.
Check out the entire RedBot family of products!