|
MB9AAA0N Datasheet, PDF (8/109 Pages) SPANSION – The MB9AAA0N Series are highly integrated | |||
|
◁ |
DataSheet
ï· Clock Super Visor (CSV)
Clocks generated by built-in CR oscillators are used to supervise abnormality of the external clocks.
ï· If external clock failure (clock stop) is detected, reset is asserted.
ï· If external frequency anomaly is detected, interrupt or reset is asserted.
ï· Low-Voltage Detector (LVD)
This Series includes 2-stage monitoring of voltage on the VCC. When the voltage falls below the voltage
that has been set, Low-Voltage Detector generates an interrupt or reset.
ï· LVD1: error reporting via interrupt
ï· LVD2: auto-reset operation
ï· Low-Power Consumption Mode
Six low-power consumption modes supported.
ï· Sleep
ï· Timer
ï· RTC
ï· Stop
ï· Deep Standby RTC
ï· Deep Standby Stop
The back up register is 16 byte
ï· Debug
Serial Wire JTAG Debug Port (SWJ-DP)
ï· Power Supply
Wide range voltage:
VCC = 1.8 V to 5.5 V
VCC = 2.2 V to 5.5 V (when LCDC is used)
June 30, 2015, MB9AAA0N_DS706-00067-2v0-E
5
|
▷ |