MB9B510R Datasheet, PDF (72/129 Pages) SPANSION – This document states the current technical specifications regarding

DataSheet
2. Recommended Operating Conditions
Parameter
Symbol
Conditions
Value
Min Max
(V_SS = AV_SS = 0.0V)
Unit Remarks
Power supply voltage
Power supply voltage for
USB ch.0
V_CC
USBV_CC
-
2.7*⁴
5.5
V
-
3.0
2.7
3.6
(≤ V_CC)
5.5
(≤ V_CC)
V
*1
*2
Analog power supply voltage
Analog reference voltage
AV_CC
AVRH
-
2.7
5.5
V AV_CC = V_CC
-
2.7
AV_CC V
Smoothing capacitor
C_S
-
1
10
μF
For built-in
regulator*³
When
FPT-100P-M23
Operating FPT-120P-M37
T_A
mounted on
four-layer
- 40
+ 85 °C
temperature
PCB
FPT-100P-M03
BGA-112P-M04
T_A
-
- 40 + 85 °C
*1: When P81/UDP0 and P80/UDM0 pin are used as USB (UDP0, UDM0).
*2: When P81/UDP0 and P80/UDM0 pin are used as GPIO (P81, P80).
*3 : See " · C Pin" in "Handling Devices" for the connection of the smoothing capacitor.
*4 : In between less than the minimum power supply voltage and low voltage reset/interrupt detection voltage
or more, instruction execution and low voltage detection function by built-in High-speed CR(including
Main PLL is used) or built-in Low-speed CR is possible to operate only.
<WARNING>
The recommended operating conditions are required in order to ensure the normal operation of the
semiconductor device. All of the device's electrical characteristics are warranted when the device is
operated within these ranges.
Always use semiconductor devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure. No warranty is made
with respect to uses, operating conditions, or combinations not represented on the data sheet. Users
considering application outside the listed conditions are advised to contact their representatives beforehand.
March 31, 2015, MB9B510R-DS706-00025-3v1-E
69