|
MB9A140NB Datasheet, PDF (7/121 Pages) SPANSION – The MB9A140NB Series are highly integrated | |||
|
◁ |
DataSheet
ï¬ HDMI-CEC/Remote Control Receiver (Up to 2 channels)
ï HDMI-CEC transmitter
ï Header block automatic transmission by judging Signal free
ï Generating status interrupt by detecting Arbitration lost
ï Generating START, EOM, ACK automatically to output CEC transmission by setting 1 byte data
ï Generating transmission status interrupt when transmitting 1 block (1 byte data and EOM/ACK)
ï HDMI-CEC receiver
ï Automatic ACK reply function available
ï Line error detection function available
ï Remote control receiver
ï 4 bytes reception buffer
ï Repeat code detection function available
ï¬ Real-time clock (RTC)
The Real-time clock can count Year/Month/Day/Hour/Minute/Second/A day of the week from 01 to 99.
ï The interrupt function with specifying date and time (Year/Month/Day/Hour/Minute/Second/A day of
the week.) is available. This function is also available by specifying only Year, Month, Day, Hour or
Minute.
ï Timer interrupt function after set time or each set time.
ï Capable of rewriting the time with continuing the time count.
ï Leap year automatic count is available.
ï¬ Watch Counter
The Watch counter is used for wake up from sleep and timer mode.
Interval timer: up to 64 s (Max) @ Sub Clock : 32.768 kHz
ï¬ External Interrupt Controller Unit
ï Up to 16 external interrupt input pins
ï Include one non-maskable interrupt (NMI) input pin
ï¬ Watchdog Timer (2 channels)
A watchdog timer can generate interrupts or a reset when a time-out value is reached.
This series consists of two different watchdogs, a Hardware watchdog and a Software watchdog.
The Hardware watchdog timer is clocked by the built-in low-speed CR oscillator. Therefore, the Hardware
watchdog is active in any low-power consumption modes except RTC, Stop, Deep Standby RTC and Deep
Standby Stop modes.
ï¬ CRC (Cyclic Redundancy Check) Accelerator
The CRC accelerator calculates the CRC which has a heavy software processing load, and achieves a
reduction of the integrity check processing load for reception data and storage.
CCITT CRC16 and IEEE-802.3 CRC32 are supported.
ï CCITT CRC16 Generator Polynomial: 0x1021
ï IEEE-802.3 CRC32 Generator Polynomial: 0x04C11DB7
4
MB9A140NB_DS706-00040-4v0-E, June 10, 2015
|
▷ |