S71AL016M Datasheet, PDF (44/68 Pages) SPANSION – Stacked Multi-Chip Product (MCP) Flash Memory and RAM

Advance Information
Absolute Maximum Ratings
Storage Temperature, Plastic Packages . . . . . . . . . . . . . . . . .–65°C to +150°C
Ambient Temperature with Power Applied . . . . . . . . . . . . . . .–65°C to +125°C
Voltage with Respect to Ground
V_CC (Note 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to +4.0 V
A9, OE#, and RESET# (Note 2) . . . . . . . . . . . . . . . . –0.5 V to +12.5 V
All other pins (Note 1) . . . . . . . . . . . . . . . . . . . . . –0.5 V to V_CC+0.5 V
Output Short Circuit Current (Note 3). . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Notes:
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions,
input or I/O pins may overshoot V_SS to –2.0 V for periods of up to 20 ns. See Figure
9. Maximum DC voltage on input or I/O pins is V_CC +0.5 V. During voltage
transitions, input or I/O pins may overshoot to V_CC +2.0 V for periods up to 20 ns.
See Figure 10.
2. Minimum DC input voltage on pins A9, OE#, and RESET# is -0.5 V. During voltage
transitions, A9, OE#, and RESET# may overshoot V_SS to –2.0 V for periods of up
to 20 ns. See Figure 9. Maximum DC input voltage on pin A9 is +12.5 V which
may overshoot to 14.0 V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short
circuit should not be greater than one second.
Stresses above those listed under Absolute Maximum Ratings may cause permanent
damage to the device. This is a stress rating only; functional operation of the device
at these or any other conditions above those indicated in the operational sections of
this data sheet is not implied. Exposure of the device to absolute maximum rating con-
ditions for extended periods may affect device reliability.
+0.8 V
–0.5 V
–2.0 V
20 ns
20 ns
20 ns
Figure 9. Maximum Negative
Overshoot Waveform
V_CC
+2.0 V
V_CC
+0.5 V
2.0 V
20 ns
20 ns
20 ns
Figure 10. Maximum Positive
Overshoot Waveform
Operating Ranges
Industrial (I) Devices
Ambient Temperature (T_A) . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
V_CC Supply Voltages
V_CC for full voltage range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7 V to 3.6 V
V_CC for regulated range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0 V to 3.6 V
Operating ranges define those limits between which the functionality of the device is
guaranteed.
44
S71AL016M
S71AL016M_M0 A0 February 23, 2005