S29AL016D Datasheet, PDF (1/58 Pages) SPANSION – 16 MEGABIT CMOS 3.0 VOLT ONLY BOOT SECTOR FLASH MEMORY

S29AL016D
16 Megabit (2 M x 8-Bit/1 M x 16-Bit)
CMOS 3.0 Volt-only Boot Sector Flash Memory
Data Sheet
PRELIMINARY
Distinctive Characteristics
Architectural Advantages
„ Single power supply operation
— Full voltage range: 2.7 to 3.6 volt read and write op-
erations for battery-powered applications
„ Manufactured on 200nm process technology
— Fully compatible with 0.23 µm Am29LV160D and
MBM29LV160E devices
„ Flexible sector architecture
— One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirty-
one 64 Kbyte sectors (byte mode)
— One 8 Kword, two 4 Kword, one 16 Kword, and thirty-
one 32 Kword sectors (word mode)
„ Sector Protection features
— A hardware method of locking a sector to prevent any
program or erase operations within that sector
— Sectors can be locked in-system or via programming
equipment
— Temporary Sector Unprotect feature allows code
changes in previously locked sectors
„ Unlock Bypass Program Command
— Reduces overall programming time when issuing
multiple program command sequences
„ Top or bottom boot block configurations
available
„ Compatibility with JEDEC standards
— Pinout and software compatible with single-power
supply Flash
— Superior inadvertent write protection
Performance Characteristics
„ High performance
— Access times as fast as 70 ns
„ Ultra low power consumption (typical values
at 5 MHz)
— 200 nA Automatic Sleep mode current
— 200 nA standby mode current
— 9 mA read current
— 20 mA program/erase current
„ Cycling endurance: 1,000,000 cycles per
sector typical
„ Data retention: 20 years typical
Package Options
„ 48-ball FBGA
„ 48-pin TSOP
„ 44-pin SOP
Software Features
„ CFI (Common Flash Interface) compliant
— Provides device-specific information to the system,
allowing host software to easily reconfigure for
different Flash devices
„ Erase Suspend/Erase Resume
— Suspends an erase operation to read data from, or
program data to, a sector that is not being erased,
then resumes the erase operation
„ Data# Polling and toggle bits
— Provides a software method of detecting program or
erase operation completion
Hardware Features
„ Ready/Busy# pin (RY/BY#)
— Provides a hardware method of detecting program or
erase cycle completion
Publication Number S29AL016D_00 Revision A Amendment 2 Issue Date December 17, 2004