SPPS-27-48F-N2-IDFA Datasheet, PDF (6/10 Pages) Source Photonics, Inc. – Sleep Mode for Power Consumption

SPPS-27-48F-N2-IDFA
Diagnostic
92
1
68
Monitoring Type
Enhanced
93
1
F0
Options
SFF-8472
94
1
02
Compliance
95
1
CC_EXT
96-255
64
Vendor Specific
Day(2 bytes)
Compliant with SFF-8472 V9.5
Externally Calibrated
Received power measurement type
-Average Power
Diagnostics (Optional
Alarm/warning flags)
Soft TX_FAULT monitoring
implemented
Soft TX_Disable monitoring
implemented
Soft RX_LOS monitoring
implemented
Diagnostics
Compliance(SFF-8472 V9.5)
Check sum of byte 64-94
Table 8– Pin Definitions
Pin Symbol
Name/Description
1
VeeT Module Transmitter Ground (note1)
2 TX_FAULT Module Transmitter Fault
3 TX_nBRST Transmitter Burst Control (note2)
4
SDL
2-Wire Serial Interface Data Line (MOD-DEF2) (note3)
5
SCL
2-Wire Serial Interface Clock (MOD-DEF1)
6 MOD_ABS Module Absent, connected to VeeT or VeeR in the module
7
Tx_SD Tx Signal Detect (note4)
Receiver Loss of Signal Indication (in FC designated as RX_LOS, in SONET
8 RX_LOS
designated as LOS, and in Ethernet designated as NOT Signal Detect)
Power saving of Tx side, On/off time less than 1ms, high active, if not use this feature, main
9 PDWN_TX
board connection should be NC.(Note5)
10
VeeR Module Receiver Ground
11
VeeR Module Receiver Ground
12
RXD- Receiver Inverted Data Output
13
RXD+ Receiver Non-Inverted Data Output
14
VeeR Module Receiver Ground
15
VCCR Module Receiver 3.3V Supply
16
VCCT Module Transmitter 3.3V Supply
17
VeeT Module Transmitter Ground
18
TXD+ Transmitter Non-Inverted Data Input
19
TXD- Transmitter Inverted Data Input
DS-6313 Rev 02 2012-07-04