 English |
|
|
|
|
|
|
|
| SPP-10S-LR-EDFC Datasheet, PDF (6/7 Pages) Source Photonics, Inc. – Support 8G FC, 10GBASE-LR/LW and SONET/SDH application | |||
| |||
| ◁ |
Preliminary Datasheet
SPP-10S-LR-EDFC
Notes:
1. The module ground pins are isolated from the module case.
2. The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.46V on host board.
3. The pin is pulled up to VCCT with a 4.7K-10KΩ resistor in the module.
4. The pins are pulled low to VEET with a >30kΩ resistor in the module.
Mechanical Diagram
Figure 4, Mechanical Diagram of SFP+
Order Information
Table 7 â Order Information
Part No.
SPP-10S-LR-EDFC
Application
8GFC/I-64.1
10GBASE-LR/LW
Data Rate
Laser Source
8.5G/9.95~11.3G 1310nm DFB
Fiber Type
SMF
DS-7380 Rev 00 2013-04-17
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese