SPP-10E-ER-CDFC Datasheet, PDF (6/7 Pages) Source Photonics, Inc. – Support 10GBASE-ER/EW application

Preliminary Datasheet Preliminary D
Preliminary Datasheet
SPP-10E-ER-CDFC
Notes:
1. The module ground pins are isolated from the module case.
2. The pins shall be pulled up with 4.7K-10Kohms to a voltage between 3.14V and 3.47V on host board.
3. The pin is pulled up to V_CCT with a 4.7K-10KΩ resistor in the module.
4. The pins are pulled low to V_EET with a >30kΩ resistor in the module.
Mechanical Diagram
Figure 4, Mechanical Diagram of SFP+
Order Information
Table 7 – Order Information
Part No.
Application
Data Rate
Laser Source Fiber Type Latch Color
SPP-10E-ER-CDFC 10GBASE-ER/EW 9.953/10.3125G 1550nm EML
SMF
Red
DS-7283 Rev 00 2013-01-05