C-13-155-FDFB-SLC8A-G5 Datasheet, PDF (6/11 Pages) Source Photonics, Inc. – 155 Mbps Single Mode SFF LC Transceiver

P/N: C-13-155(C)-FDFB-SLC8A-G5
155 Mbps Single Mode SFF LC Transceiver
C-13-155C-FDFB-SLC8A-G5
TERMINATE AT
TRANSCEIVER INPUTS
100Ω
10 9 8 7 6
Tx
Rx
12 3 4 5
NOTE:C1=C2=C3=100nF
Z=50Ω
Z=50Ω
PHY DEVICE
Vcc(+3.3V)
TD-
TD+
130Ω 130Ω
LVPECL
1μH
C2
Vcc(+3.3V)
C3 10μF
Tx Disable
LVTTL
1μH
Vcc(+3.3V)
C1
RD+
Z=50Ω
100Ω
LVPECL
RD-
Z=50Ω
Vcc(+3.3V)
Z=50Ω
SD
LVTTL
TERMINATE AT
DEVICE INPUTS
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
-6-
DS1960 Oct1508-Rev A.0