|
C-15-155-TDFB-SSC10 Datasheet, PDF (5/11 Pages) Source Photonics, Inc. – 155 Mbps DFB Laser Single Mode Transceiver (Ultra-LR) | |||
|
◁ |
155 Mbps DFB Laser Single Mode Transceiver
(Ultra-LR)
C-15-155-TDFB(3)-SXX10(12)
Recommended Circuit Schematic
Tx Vcc
C5
R1 R3
9 8 7 65 43 2 1
TD +
TD -
R2 R4
Notes +3.3V:
R1=R3=R5=R7=R9=130ï¡
R2=R4=R6=R8=R10=82ï¡
C1=C2=C3=C5=C6=0.1ï¢F
C4=10ï¢F
L1=L2=1ï¢H
Tx Vcc
Rx Vcc
No internal
connection
Transceiver
Top view
No internal
connection
Notes +5V:
Vcc
R1=R3=R5=R7=R9=82ï¡
R2=R4=R6=R8=R10=130ï¡
C1=C2=C3=C5=C6=0.1ï¢F
C4=10ï¢F
L1=L2=1ï¢H
Rx Vcc
R9 R5 R7
R10 R6 R8
C6
RD +
RD -
SD
L1
C3
L2
C4
Rx Vcc
C1
Tx Vcc
C2
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply ï¬ltering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
LUMINENTOIC.COM
20550 Nordhoff St. ⢠Chatsworth, CA 91311 ⢠tel: 818.773.9044 ⢠fax: 818.576.9486
9F, No 81, Shui Lee Rd. ⢠Hsinchu, Taiwan, R.O.C. ⢠tel: 886.3.5169222 ⢠fax: 886.3.5169213
5
LUMNDS813-Jul0706
Rev A.2
|
▷ |