C-13-155-T-SSC3 Datasheet, PDF (4/7 Pages) Source Photonics, Inc. – 155 Mbps Single Mode Transceiver

Recommended Circuit Schematic
155 Mbps Single Mode Transceiver
C-13-155(C)-T3-SXX3(5)
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: [phone] • fax: [phone]
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: [phone] • fax: [phone]
4
LUMNDS272-JAN2904
rev. 0