|
C-13-15-622-TDFB-SST4 Datasheet, PDF (4/7 Pages) Source Photonics, Inc. – 622 Mbps DFB Laser Single Mode Transceiver(LH) | |||
|
◁ |
622 Mbps DFB Laser Single Mode Transceiver(LH)
Recommended Circuit Schematic
C-1X-622-TDFB(3)-SST(FC)4
C-1X-622(C)-TDFB(3)-SST(FC)4
C-1X-622C-TDFB(3)-SST(FC)4
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply ï¬ltering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
LUMINENTOIC.COM
20550 Nordhoff St. ⢠Chatsworth, CA 91311 ⢠tel: 818.773.9044 ⢠fax: 818.576.9486
9F, No 81, Shui Lee Rd. ⢠Hsinchu, Taiwan, R.O.C. ⢠tel: 886.3.5169222 ⢠fax: 886.3.5169213
4
LUMNDS857-Jun0306
Rev A.1
|
▷ |