B-15-13-155-FDFB-SSC5 Datasheet, PDF (4/9 Pages) Source Photonics, Inc. – 155 Mbps bi-directional SC Receptacle Single Fiber Transceiver

155 Mbps bi-directional SC Receptacle
Single Fiber Transceiver
B-15/13-155-FDFB-SSC5
Recommended Circuit Schematic
TERMINATE AT
TRANSCEIVER INPUTS
Z=50�
PHY DEVICE
Vcc(+3.3V)
TD-
100�
Z=50�
LVPECL
TD+
10 9 8 7 6
130� 130�
1�H
Vcc(+3.3V)
C2
C3 10�F
Tx
Rx
1�H
Vcc(+3.3V)
C1
12 3 4 5
130� 130�
Z=50�
Z=50�
Z=50�
RD+
100�
RD-
Vcc(+3.3V)
130�
SD
LVPECL
NOTE:C1=C2=C3=100nF
82�
TERMINATE AT
DEVICE INPUTS
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: [phone] • fax: [phone]
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: [phone] • fax: [phone]
4
LUMNDS1282-Sep2806
Rev A.2