B-13-155-TPM-S Datasheet, PDF (4/5 Pages) Source Photonics, Inc. – 155 Mbps Bi-directional Single Fiber Transceiver

155 Mbps Bi-directional Single Fiber Transceiver
Recommended Circuit Schematic
B-13/15-155-TPM-Sxx3-60
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
Package Diagram
B-13/15-155-TPM-SSC (FC/ST/MU) 3-60.
Units in mm (inch)
4