C-13-622-TDFB-SSC4 Datasheet, PDF (2/7 Pages) Source Photonics, Inc. – 622 Mbps DFB Laser Single Mode Transceiver(LH)

622 Mbps DFB Laser Single Mode Transceiver(LH)
C-1X-622(C)-TDFB(3)-SSC4
Transmitter Specifications
Parameter
Electrical
Power Supply Current
Data Input Current-Low
Data Input Current-High
Differential Input Voltage
Data Input Voltage-Low
Data Input Voltage-High
Symbol
Min
Typical
Max
I_CC
-
-
150
I_IL
-350
-
-
I_IH
-
-
350
V_IH-V_IL
300
-
-
VIL-VCC
-2.0
-
-1.58
V_IH-V_CC
-1.1
-
-0.74
Unit
Notes
mA
Maximum current is specified at Vcc=
Maximum @ maximum temperature
µA
µA
mV
V
These inputs are compatible with 10K, 10KH
V
and 100K ECL and PECL inputs
Receiver Specifications
Parameter
Optical
Sensitivity
Maximum Input Power
Signal Detect-Asserted
Signal Detect-Deasserted
Signal Detect-Hysteresis
Wavelength of Operation
Symbol
-
P_in
Pa
Pd
Min
-
-3
-
-40
-
1100
Typical
-
-
-
-
3
-
Max
-28
-
-28
-
-
1600
Unit
Notes
dBm Measured with 2²³-1 PRBS,BER= 10^-10
dBm
dBm Measured on transition: low to high
dBm Measured on transition: high to low
dB
nm
Receiver Specifications
Parameter
Symbol
Min
Electrical
Power Supply Current
I_CC
-
Data Output Voltage-Low
VOL -V_cc
-2.0
Data Output Voltage-High
V_OH- V_cc
-1.1
Signal Detect Output Voltage-Low V_SDL
-
Signal Detect Output Voltage-High V_SDH
2.0
Signal Detect Output Voltage-Low V_SDL-Vcc
-2.0
Signal Detect Output Voltage-High V_SDH- V_cc
-1.1
Typical
-
-
-
-
-
-
-
Max
100
-1.58
-0.74
0.5
-
-1.58
-0.74
Unit
Note
mA The current excludes the output load current
V
These outputs are compatible with 10K,
V
10KH and 100KECL and PECL outputs
V
C-1X-622C-TDFB(3)-SSC4
V
V
C-1X-622-TDFB(3)-SSC4
V
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: [phone] • fax: [phone]
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: [phone] • fax: [phone]
2
LUMNDS577-Jun0306
Rev A.1