C-13-1250-FDFB-SLC2 Datasheet, PDF (2/11 Pages) Source Photonics, Inc. – 1.25 Gbps Single Mode SFF LC Transceiver

1.25 Gbps Single Mode SFF LC Transceiver
C-1x-1250(C)-FDFB-SLC2(4)
Transmitter Specifications
Parameter
Electrical
Power Supply Current
Transmit Enable Voltage
Transmit Disable Voltage
Data Input Current-Low
Data Input Current-High
Data Input Voltage-Low
Data Input Voltage-High
Receiver Specifications
Parameter
Optical
Sensitivity
Maximum Input Power
Signal Detect-Asserted
Signal Detect-Deasserted
Signal Detect-Hysteresis
Wavelength of Operation
Symbol
Min
Typical
Max
I_CC
-
-
180
VEN
0
-
0.8
VD
2.0
-
Vcc
I_IL
-200
-
-
I_IH
-
-
200
VIL-VCC
-2.0
-
-1.58
V_IH-V_CC
-1.1
-
-0.74
Unit
Notes
mA
Maximum current is specified at
Vcc= Maximum @ maximum temperature
V
V
µA
µA
V
These inputs are compatible with 10K, 10KH
V
and 100K ECL and PECL inputs
Symbol
Min
Typical
Max
-
-
-
-24
P_in
-3
Pa
-
-
-
-
-24
Pd
-38
-
-
1.0
-
-
1100
-
1600
Unit
Notes
dBm Measured with 2⁷-1 PRBS, BER = 10^-12
dBm
dBm Measured on transition: low to high
dBm Measured on transition: high to low
dB
nm
Receiver Specifications
Parameter
Electrical
Symbol
Min
Power Supply Current
I_CC
-
Data Output Voltage-Low
VOL -V_cc
-2
Data Output Voltage-High
V_OH- V_cc
-1.1
Signal Detect Output Voltage-Low V_SDL-Vcc
-2
Signal Detect Output Voltage-High V_SDH- V_cc
-1.1
Signal Detect Output Voltage-Low V_SDL-Vcc
-
Signal Detect Output Voltage-High V_SDH- V_cc
2.0
Typical
Max
-
120
-
-1.58
-
-0.74
-
-1.58
-
-0.74
-
0.5
-
-
Unit
Note
mA
The current excludes the output load
current
V
These outputs are compatible with 10K,
V
10KH and 100K ECL and LVPECL outputs
V
C-1x-1250-FDFB-SLC2(4)
V
V
C-1x-1250C-FDFB-SLC2(4)
V
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: [phone] • fax: [phone]
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: [phone] • fax: [phone]
2
LUMNDS613-Oct2406
Rev. A.2