|
FTM-9712P-F20 Datasheet, PDF (1/13 Pages) Source Photonics, Inc. – 2×5/2×10 SFF GEPON OLT Transceiver | |||
|
Mar. 20, 2007
2Ã5/2Ã10 SFF GEPON OLT Transceiver
FTM-9712P(T)-F(K)20(G)
(IEEE 802.3ahTM-2004 1000Base-PX20-D)
Standard
Members of FlexonTM Family
Features
 Single fiber bi-directional data links with symmetric
1.25Gbps upstream and 1.25Gbps downstream
 Integrated with micro-optics WDM filter for dual
wavelength Tx/Rx operation at 1490/1310nm
 1490nm continuous-mode transmitter with DFB
laser
 1310nm burst-mode receiver with APD-TIA
 Optical isolator built in for extreme Return Loss
tolerance
 Resetless burst-mode receiver design
 Support more than 24dB dynamic range
 0 to 70°C operating temperature
 Optional 2Ã5/2à 10 SF F package with SC/UPC
and SC/APC pigtail
 Single 3.3V power supply
 LVPECL compatible data input/output interface
 LVTTL transmitter disable control
 LVTTL transmitter laser failure alarm
(P-K20(G),T-K20(G))
 LVTTL receiver signal-detected indication
 Low EMI and excellent ESD protection
 Classâ
laser safety standard IEC-60825 compliant
 RoHS compliance (FTM-9712P(T)-F(K)20G)
Applications
 Compliant with SFF MSA
 Compliant with IEEE 802.3ahâ¢-2004
 Compliant with FCC 47 CFR Part 15, Class B
 Compliant with FDA 21 CFR 1040.10 and 1040.11,
Classâ
Description
FTM-9712P(T)-F(K)20(G) is Optical Line Terminal (OLT)
compliant with 1000BASE-PX20 application.
The transceiver is the high performance module for
1.25Gbps data link in single fiber by using 1490nm
continuous-mode transmitter and 1310nm burst-mode
receiver.
The transmitter section uses a multiple quantum well
1490nm DFB laser and is Class â
laser compliant
product according to international safety standard
IEC-60825.
The receiver section uses an integrated 1310nm PIN
diode and preamplifier mounted in an optical header
and limiting post-amplifier IC. Unlike the conventional
burst-mode receiver, the receiver does not require reset
pulse to receive optical data packets with different
optical power.
The optical output can be disabled by a LVTTL logic
high-level input of TX_DIS. LAS_nFAIL is provided to
indicate that degradation of the laser (2Ã1 0 SFF ).
Signal Detected (SD) output is provided to indicate the
detection of an input optical signal of receiver.
 Gigabit Ethernet Passive Optical Networks
(GEPON) â OLT side
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 13
Doc No: DS3513000-1d
|
▷ |