FTM-9412P-F10 Datasheet, PDF (1/11 Pages) Source Photonics, Inc. – 2x5 SFF GEPON ONU Transceiver

2x5 SFF GEPON ONU Transceiver
FTM-9412P-F10G
(IEEE 802.3ah™-2004 1000BASE-PX10-U)
Sep. 11, 2007
Members of Flexon^TM Family
Standard
Features
‹ Single fiber bi-directional data links with symmetric
1.25Gbps upstream and 1.25Gbps downstream
‹ Integrated micro-optics WDM filter for dual
wavelength Tx/Rx operation at 1310/1490nm
‹ 1310nm burst-mode transmitter with FP laser
‹ 1490nm continuous-mode receiver with PIN-TIA
‹ 1550nm optical signal rejection
‹ 0 to 70℃ operating temperature
‹ 2× 5 SFF package with SC/UPC pigtail
‹ Single 3.3V power supply
‹ LVPECL compatible data input/output interface
‹ LVTTL transmitter burst-mode control
‹ LVTTL receiver signal-detected indication
‹ Low EMI and excellent ESD protection
‹ Class I laser safety standard IEC-60825 compliant
‹ RoHS compliance
Applications
‹ Gigabit Ethernet Passive Optical Networks
(GEPON) – ONU side
‹ Gigabit Ethernet Point-to-Point Bi-directional
Transmission
‹ Media Converts for Fiber-In-The-Loop (FITL)
‹ Compliant with SFF MSA
‹ Compliant with IEEE Std 802.3ah™ -2004
1000BASE-PX10-U
‹ Compliant with FCC 47 CFR Part 15, Class B
‹ Compliant with FDA 21 CFR 1040.10 and 1040.11,
Class I
Description
FTM-9412P-F10-BT is Optical Network Unit (ONU) for
IEEE802.3ah™-2004 1000BASE-PX10 application. It
also fully complies with customized specification from
BT.
The transceiver is the high performance module for
1.25Gbps data link in single fiber by using 1310nm burst
mode transmitter and 1490nm continuous mode
receiver with 1550nm optical signal rejection.
The transmitter section uses a multiple quantum well
1310nm FP laser and is class I laser complaint product
according to International Safety Standard IEC-60825,
supporting burst-mode operation.
The receiver section uses an integrated 1490nm PIN
and preamplifier mounted in an optical header and
limiting post-amplifier IC.
The optical burst output can be enabled by a LVTTL logic
high-level input of TX_BRST. Signal Detected (SD)
output is provided to indicate the detection of an input
optical signal of receiver.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Page 1 of 12